Data Object - PhysicalNic(

Property of
HostNetworkInfo, HostOpaqueSwitch, HostProxySwitch, HostSriovNetworkDevicePoolInfo, HostVirtualSwitch, IscsiPortInfo
See also
FcoeConfig, PhysicalNicLinkInfo, PhysicalNicSpec

Data Object Description

This data object type describes the physical network adapter as seen by the primary operating system.


Name Type Description

If set the flag indicates if the physical network adapter supports autonegotiate.

Since vSphere API 4.1

The device name of the physical network adapter.

The name of the driver.

The FCoE configuration of the physical network adapter.

Since vSphere API 5.0

The linkable identifier.

The current link state of the physical network adapter. If this object is not set, then the link is down.

The media access control (MAC) address of the physical network adapter.

Since VI API 2.5

Device hash of the PCI device corresponding to this physical network adapter.

Flag indicating whether the NIC allows resource pool based scheduling for network I/O control.

Since vSphere API 4.1

If resourcePoolSchedulerAllowed is false, this property advertises the reason for disallowing resource scheduling on this NIC. The reasons may be one of PhysicalNicResourcePoolSchedulerDisallowedReason

Since vSphere API 4.1

The specification of the physical network adapter.

The valid combinations of speed and duplexity for this physical network adapter. The speed and the duplex settings usually must be configured as a pair. This array lists all the valid combinations available for a physical network adapter.

Autonegotiate is not listed as one of the combinations supported. If is implicitly supported by the physical network adapter unless autoNegotiateSupported is set to false.


Flag indicating whether the NIC supports VMDirectPath Gen 2. Note that this is only an indicator of the capabilities of this NIC, not of the whole host.

If the host software is not capable of VMDirectPath Gen 2, this property will be unset, as the host cannot provide information on the NIC capability.
See vmDirectPathGen2Supported

Since vSphere API 4.1

If vmDirectPathGen2Supported is true, this property advertises the VMDirectPath Gen 2 mode supported by this NIC (chosen from PhysicalNicVmDirectPathGen2SupportedMode). A mode may require that the associated vSphere Distributed Switch have a particular ProductSpec in order for network passthrough to be possible.

Since vSphere API 4.1

Flag indicating whether the NIC is wake-on-LAN capable

Since VI API 2.5
Properties inherited from DynamicData
*Need not be set
Show WSDL type definition