ESX/ESXi host updates might require that the host enters maintenance mode before they can be applied. Update Manager puts the ESX/ESXi hosts in maintenance mode before applying these updates. You can configure how Update Manager responds if the host fails to enter maintenance mode.

For hosts in a container different from a cluster or for individual hosts, migration of the virtual machines with vMotion cannot be performed. If vCenter Server cannot migrate the virtual machines to another host, you can configure how Update Manager responds.

Connect the vSphere Client to a vCenter Server system with which Update Manager is registered, and on the Home page, click Update Manager under Solutions and Applications. If your vCenter Server system is part of a connected group in vCenter Linked Mode, you must specify the Update Manager instance to use, by selecting the name of the corresponding vCenter Server system in the navigation bar.


On the Configuration tab, under Settings, click ESX Host/Cluster Settings.


Under Maintenance Mode Settings, select an option from the VM Power state drop-down menu to determine the change of the power state of the virtual machines and appliances that are running on the host to be remediated.



Power Off virtual machines

Powers off all virtual machines and virtual appliances before remediation.

Suspend virtual machines

Suspends all running virtual machines and virtual appliances before remediation.

Do Not Change VM Power State

Leaves virtual machines and virtual appliances in their current power state. This is the default setting.


(Optional) Select Retry entering maintenance mode in case of failure, specify the retry delay, and the number of retries.

If a host fails to enter maintenance mode before remediation, Update Manager waits for the retry delay period and retries putting the host into maintenance mode as many times as you indicate in Number of retries field.


(Optional) Select Temporarily disable any removable media devices that might prevent a host from entering maintenance mode.

Update Manager does not remediate hosts on which virtual machines have connected CD/DVD or floppy drives. All removable media drives that are connected to the virtual machines on a host might prevent the host from entering maintenance mode and interrupt remediation.

After remediation, Update Manager reconnects the removable media devices if they are still available.


Click Apply.

These settings become the default failure response settings. You can specify different settings when you configure individual remediation tasks.