Equipment misconfiguration and network hardware, firmware, or software defects can make a VLAN susceptible to VLAN-hopping attacks.

VLAN hopping occurs when an attacker with authorized access to one VLAN creates packets that trick physical switches into transmitting the packets to another VLAN that the attacker is not authorized to access. Vulnerability to this type of attack usually results from a switch being misconfigured for native VLAN operation, in which the switch can receive and transmit untagged packets.

To help prevent VLAN hopping, keep your equipment up to date by installing hardware and firmware updates as they become available. Also, follow your vendor’s best practice guidelines when you configure your equipment.

VMware standard switches do not support the concept of a native VLAN. All data passed on these switches is appropriately tagged. However, because other switches in the network might be configured for native VLAN operation, VLANs configured with standard switches can still be vulnerable to VLAN hopping.

If you plan to use VLANs to enforce network security, disable the native VLAN feature for all switches unless you have a compelling reason to operate some of your VLANs in native mode. If you must use native VLAN, see your switch vendor’s configuration guidelines for this feature.