NetQueue is enabled by default.

1

Log in to the vSphere Client and select the host from the inventory panel.

2

Click the Configuration tab, and click Advanced Settings.

3

Deselect VMkernel.Boot.netNetQueueEnable and click OK.

4

To disable NetQueue on the NIC driver, use the vicfg-module -s "" [module name] command.

For example, if you are using the s2io NIC driver, use vicfg-module -s "" s2io.

For information on the VMware vSphere CLI, see the VMware vSphere Command-Line Interface Installation and Reference guide.

5

Reboot the host.