To install View Connection Server as a single server or as the first instance in a group of replicated View Connection Server instances, you use the standard installation option.

When you select the standard installation option, the installation creates a new, local View LDAP configuration. The installation loads the schema definitions, Directory Information Tree (DIT) definition, and ACLs and initializes the data.

After installation, you manage most View LDAP configuration data by using View Administrator. View Connection Server automatically maintains some View LDAP entries.

The View Connection Server software cannot coexist on the same virtual or physical machine with any other View Manager software component, including a replica server, security server, View Composer, View Agent, View Client, or View Transfer Server.

When you install View Connection Server with a new configuration, you can participate in a customer experience improvement program. VMware collects anonymous data about your deployment in order to improve VMware's response to user requirements. No data that identifies your organization is collected. You can choose not to participate by deselecting this option during the installation. If you change your mind about participating after the installation, you can either join or withdraw from the program by editing the Product Licensing and Usage page in View Administrator. To review the list of fields from which data is collected, including the fields that are made anonymous, see "Information Collected by the Customer Experience Improvement Program" in the VMware Horizon View Administration document.

Verify that you can log in as a domain user with administrator privileges on the Windows Server computer on which you install View Connection Server.

Verify that your installation satisfies the requirements described in View Connection Server Requirements.

Prepare your environment for the installation. See Installation Prerequisites for View Connection Server.

If you intend to authorize a domain user or group as the View Administrators account, verify that you created the domain account in Active Directory.

If you use MIT Kerberos authentication to log in to a Windows Server 2008 R2 computer on which you are installing View Connection Server, install the Microsoft hotfix that is described in KB 978116 at

Prepare a data recovery password. When you back up View Connection Server, the View LDAP configuration is exported as encrypted LDIF data. To restore the encrypted backup View configuration, you must provide the data recovery password. The password must contain between 1 and 128 characters. Follow your organization's best practices for generating secure passwords.


You will need the data recovery password to keep View operating and avoid downtime in a Business Continuity and Disaster Recovery (BCDR) scenario. You can provide a password reminder with the password when you install View Connection Server.

Familiarize yourself with the network ports that must be opened on the Windows Firewall for View Connection Server instances. See Firewall Rules for View Connection Server.

If you plan to pair a security server with this View Connection Server instance, verify that Windows Firewall with Advanced Security is set to on in the active profiles. It is recommended that you turn this setting to on for all profiles. By default, IPsec rules govern connections between security server and View Connection Server and require Windows Firewall with Advanced Security to be enabled.

If your network topology includes a back-end firewall between a security server and the View Connection Server instance, you must configure the firewall to support IPsec. See Configuring a Back-End Firewall to Support IPsec.


Download the View Connection Server installer file from the VMware product page at to the Windows Server computer.

The installer filename is VMware-viewconnectionserver-x86_64-y.y.y-xxxxxx.exe, where xxxxxx is the build number and y.y.y is the version number.


To start the View Connection Server installation program, double-click the installer file.


Accept the VMware license terms.


Accept or change the destination folder.


Select the View Standard Server installation option.


Type a data recovery password and, optionally, a password reminder.


Choose how to configure the Windows Firewall service.



Configure Windows Firewall automatically

Let the installer configure Windows Firewall to allow the required network connections.

Do not configure Windows Firewall

Configure the Windows firewall rules manually.

Select this option only if your organization uses its own predefined rules for configuring Windows Firewall.


Authorize a View Administrators account.

Only members of this account can log in to View Administrator, exercise full View administration rights, and install replicated View Connection Server instances and other View servers.



Authorize the local Administrators group

Allows users in the local Administrators group to administer View.

Authorize a specific domain user or domain group

Allows the specified domain user or group to administer View.


If you specified a domain View Administrators account, and you are running the installer as a local administrator or another user without access to the domain account, provide credentials to log in to the domain with an authorized user name and password.

Use domain name\user name or user principal name (UPN) format. UPN format can be


Choose whether to participate in the customer experience improvement program.

If you participate, you can optionally select the type, size, and location of your organization.


Complete the installation wizard to finish installing View Connection Server.


Check for new patches on the Windows Server computer and run Windows Update as needed.

Even if you fully patched the Windows Server computer before you installed View Connection Server, the installation might have enabled operating system features for the first time. Additional patches might now be required.

The View services are installed on the Windows Server computer:

VMware View Connection Server

VMware View Framework Component

VMware View Message Bus Component

VMware View Script Host

VMware View Security Gateway Component

VMware View PCoIP Secure Gateway

VMware View Blast Secure Gateway

VMware View Web Component

VMware VDMDS, which provides View LDAP directory services

For information about these services, see the VMware Horizon View Administration document.

Configure SSL server certificates for View Connection Server. See Configuring SSL Certificates for View Servers.

Perform initial configuration on View Connection Server. See Configuring View for the First Time.

If you plan to include replicated View Connection Server instances and security servers in your deployment, you must install each server instance by running the View Connection Server installer file.

If you are reinstalling View Connection Server on a Windows Server 2008 operating system and you have a data collector set configured to monitor performance data, stop the data collector set and start it again.