VMware Identity Manager Cloud Deployment
  Deployment Models
    Deployment Model Using AirWatch Cloud Connector
    Deployment Model Using VMware Identity Manager Connector in Outbound-Only Connection Mode
      Adding Kerberos Authentication Support to Your Deployment
  Preparing to Install VMware Identity Manager Connector
    System and Network Configuration Requirements
    Create DNS Records and IP Addresses
    Deployment Checklists
  Deploying the VMware Identity Manager Connector
    Generate Activation Code for Connector
    Install and Configure the Connector Virtual Appliance
    Set up a Directory
    Enable Authentication Adapters on the Connector
    Enable Outbound Mode for the Connector
  Configuring High Availability for the VMware Identity Manager Connector
    Install Additional Connector Instances
    Add New Connector to Built-in Identity Provider
    Enabling Directory Sync on Another Connector in the Event of a Failure
  Adding Kerberos Authentication Support to Your VMware Identity Manager Connector Deployment
    Configuring and Enabling the Kerberos Authentication Adapter
    Configuring High Availability for Kerberos Authentication
      Configure Load Balancer Settings
      Apply VMware Identity Manager Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to the VMware Identity Manager Connector
      Change Connector IdP Host Name to the Load Balancer Host Name
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
    Integrating with Active Directory
      Active Directory Environments
      About Domain Controller Selection (domain_krb.properties file)
        Overriding the Default Subnet Selection
        Editing the domain_krb.properties file
        Troubleshooting domain_krb.properties
      Managing User Attributes that Sync from Active Directory
        Select Attributes to Sync with Directory
      Permissions Required for Joining a Domain
      Configuring Active Directory Connection to the Service
      Enabling Users to Change Active Directory Passwords
    Integrating with LDAP Directories
      Limitations of LDAP Directory Integration
      Integrate an LDAP Directory with the Service
    Adding a Directory After Configuring Failover and Redundancy
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Deleting a VMware Identity Manager Connector Instance
  Deployment Models
    Deployment Model Using AirWatch Cloud Connector
    Deployment Model Using VMware Identity Manager Connector in Outbound-Only Connection Mode
      Adding Kerberos Authentication Support to Your Deployment
  Preparing to Install VMware Identity Manager Connector
    System and Network Configuration Requirements
    Create DNS Records and IP Addresses
    Deployment Checklists
  Deploying the VMware Identity Manager Connector
    Generate Activation Code for Connector
    Install and Configure the Connector Virtual Appliance
    Set up a Directory
    Enable Authentication Adapters on the Connector
    Enable Outbound Mode for the Connector
  Configuring High Availability for the VMware Identity Manager Connector
    Install Additional Connector Instances
    Add New Connector to Built-in Identity Provider
    Enabling Directory Sync on Another Connector in the Event of a Failure
  Adding Kerberos Authentication Support to Your VMware Identity Manager Connector Deployment
    Configuring and Enabling the Kerberos Authentication Adapter
    Configuring High Availability for Kerberos Authentication
      Configure Load Balancer Settings
      Apply VMware Identity Manager Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to the VMware Identity Manager Connector
      Change Connector IdP Host Name to the Load Balancer Host Name
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
    Integrating with Active Directory
      Active Directory Environments
      About Domain Controller Selection (domain_krb.properties file)
        Overriding the Default Subnet Selection
        Editing the domain_krb.properties file
        Troubleshooting domain_krb.properties
      Managing User Attributes that Sync from Active Directory
        Select Attributes to Sync with Directory
      Permissions Required for Joining a Domain
      Configuring Active Directory Connection to the Service
      Enabling Users to Change Active Directory Passwords
    Integrating with LDAP Directories
      Limitations of LDAP Directory Integration
      Integrate an LDAP Directory with the Service
    Adding a Directory After Configuring Failover and Redundancy
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Deleting a VMware Identity Manager Connector Instance
VMware Identity Manager Connector Installation and Configuration (Legacy Mode)
  Preparing to Install VMware Identity Manager Connector
    Planning the Deployment Strategy
    General Configuration Requirements
    System and Network Configuration Requirements
    Deployment Checklists
  Deploying VMware Identity Manager Connector
    Create Your Identity Provider
    Deploy the Connector OVA File
    Configure Connector Settings
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Advanced Configuration for the Connector Appliance
    Using a Load Balancer to Enable External Access to the Connector
      Apply Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to Connector
    Setting Proxy Server Settings for Connector
    Configuring Redundancy
      Configuring Failover and Redundancy for Connector Appliances
      Enabling Directory Sync on Another Connector Instance in the Event of a Failure
      Adding a Directory After Configuring Failover and Redundancy
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Reset Expired Active Directory Passwords
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrate an LDAP Directory with the Service
  Deleting a VMware Identity Manager Connector Instance
  Preparing to Install VMware Identity Manager Connector
    Planning the Deployment Strategy
    General Configuration Requirements
    System and Network Configuration Requirements
    Deployment Checklists
  Deploying VMware Identity Manager Connector
    Create Your Identity Provider
    Deploy the Connector OVA File
    Configure Connector Settings
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Advanced Configuration for the Connector Appliance
    Using a Load Balancer to Enable External Access to the Connector
      Apply Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to Connector
    Setting Proxy Server Settings for Connector
    Configuring Redundancy
      Configuring Failover and Redundancy for Connector Appliances
      Enabling Directory Sync on Another Connector Instance in the Event of a Failure
      Adding a Directory After Configuring Failover and Redundancy
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Reset Expired Active Directory Passwords
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrate an LDAP Directory with the Service
  Deleting a VMware Identity Manager Connector Instance
Upgrading VMware Identity Manager Connector
  About Upgrading VMware Identity Manager Connector
  Preparing to Upgrade VMware Identity Manager Connector
    Prerequisites for Upgrade
    Check for the Availability of a VMware Identity Manager Connector Upgrade Online
    Configure Proxy Server Settings for the VMware Identity Manager Connector Appliance
  Performing an Online Upgrade of VMware Identity Manager Connector
  Performing an Offline Upgrade of VMware Identity Manager Connector
    Prepare a Local Web Server for Offline Upgrade
    Configure the Connector and Perform Offline Upgrade
  Configure Settings after Upgrading Connector
  Troubleshooting Upgrade Errors
    Checking the Upgrade Error Logs
    Rolling Back to Snapshots of Connector
    Collecting a Log File Bundle
  About Upgrading VMware Identity Manager Connector
  Preparing to Upgrade VMware Identity Manager Connector
    Prerequisites for Upgrade
    Check for the Availability of a VMware Identity Manager Connector Upgrade Online
    Configure Proxy Server Settings for the VMware Identity Manager Connector Appliance
  Performing an Online Upgrade of VMware Identity Manager Connector
  Performing an Offline Upgrade of VMware Identity Manager Connector
    Prepare a Local Web Server for Offline Upgrade
    Configure the Connector and Perform Offline Upgrade
  Configure Settings after Upgrading Connector
  Troubleshooting Upgrade Errors
    Checking the Upgrade Error Logs
    Rolling Back to Snapshots of Connector
    Collecting a Log File Bundle
VMware Identity Manager Administration Guide
  Working in VMware Identity Manager Administration Console
    Navigating in the Administration Console
    Identity and Access Management Settings Overview
  Integrating Your Enterprise Directory with VMware Identity Manager
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Change Active Directory Passwords
    Setting up Directory Sync Safeguards
      Configure Directory Sync Safeguards
      Ignore Safeguard Settings to Complete Syncing to the Directory
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrating an LDAP Directory with the Service
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
    Configuring Authentication Method for System Admin Users
  Just-in-Time User Provisioning
    About Just-in-Time User Provisioning
    Preparing for Just-in-Time Provisioning
      Create Local Groups
      Review User Attributes
    Configuring Just-in-Time User Provisioning
    Requirements for SAML Assertions
    Disabling Just-in-Time User Provisioning
    Deleting a Just-in-Time Directory
    Error Messages
  Managing the User Login Experience
    Login Experience Using Unique Identifier
      Set Up Unique Identifier-Based Log In
    Requiring Terms of Use to Access the Workspace ONE Catalog
      Set Up and Enable Terms of Use
      View Status of Terms of Use Acceptance
  Configuring User Authentication in VMware Identity Manager
    Configuring Kerberos for VMware Identity Manager
      Implementing Kerberos for Desktops with Integrated Windows Authentication
        Configure Kerberos Authentication for Desktops with Integrated Windows Authentication
        Configuring your Browser for Kerberos
          Configure Internet Explorer to Access the Web Interface
          Configure Firefox to Access the Web Interface
          Configure the Chrome Browser to Access the Web Interface
    Configuring SecurID for VMware Identity Manager
      Prepare the RSA SecurID Server
      Configure RSA SecurID Authentication
    Configuring RADIUS for VMware Identity Manager
      Prepare the RADIUS Server
      Configure RADIUS Authentication in VMware Identity Manager
    Configuring RSA Adaptive Authentication in VMware Identity Manager
      Configure RSA Adaptive Authentication in Identity Manager
    Configuring a Certificate or Smart Card Adapter for Use with VMware Identity Manager
      Using User Principal Name for Certificate Authentication
      Certificate Authority Required for Authentication
      Using Certificate Revocation Checking
      Configure Certificate-based Authentication
    Configuring VMware Verify for Two-Factor Authentication
      Enable VMware Verify
      Registering End Users with VMware Verify
      Remove Registered Phone Number from User Profile
    Using Built-in Identity Providers
      Configuring Authentication Methods for Built-In Identity Providers
        Configure Password Authentication to AirWatch
        Enabling Compliance Checking for AirWatch Managed Devices
          Enable Compliance Checking
        Configure the Local Directory Password Authentication Method
        Configure Certificate-based Authentication
        Configuring Mobile SSO for iOS Authentication in the Built-in Identity Provider
          Using the Cloud Hosted KDC Service
          Configure Mobile SSO for iOS Authentication in the Built-In Identity Provider
        Configure Mobile SSO for Android Authentication in the Built-in Identity Provider
      Configure Built-in Identity Providers
      Using Outbound Connector for Authentication in Built-in Identity Providers
      Configure a Built-in Identity Provider with Authentication Methods Configured on an Outbound-Only Connector
    Configure Additional Workspace Identity Providers
    Configuring a Third-Party Identity Provider Instance to Authenticate Users
      Add and Configure an Identity Provider Instance
    Managing Authentication Methods to Apply to Users
      Add or Edit a Network Range
      Applying the Default Access Policy
        Apply Authentication Methods to Policy Rules
  Managing Access Policies
    Configuring Access Policy Settings
    Managing Web and Desktop Application-Specific Policies
    Add a Web or Desktop Application-Specific Policy
    Configure Custom Access Denied Error Message
    Edit Default Access Policy
    Enabling Compliance Checking for AirWatch Managed Devices
      Configure Access Policy Rule
    Enabling Persistent Cookie on Mobile Devices
      Enable Persistent Cookie
  Managing Users and Groups
    User and Group Types
    About User Names and Group Names
      Sync Directory to Correct Domain Information
    Managing Users
    Create Groups and Configure Group Rules
    Edit Group Rules
    Add Resources to Groups
    Create Local Users
      Add Local Users
      Disable or Enable Local Users
      Delete Local Users
    Managing Passwords
      Configure Password Policy for Local Users
  Managing the Catalog
    Managing Resources in the Catalog
      Adding Web Applications to Your Catalog
        Add Web Applications to your Catalog
      Adding Citrix Published Applications
      Adding Horizon Air Applications
    Grouping Resource into Categories
      Create a Resource Category
      Apply a Category to Resources
      Remove a Category from an Application
      Delete a Category
    Managing Catalog Settings
      SAML Signing Certificates
        Download SAML Certificates to Configure with Relying Applications
        Generate a Certificate Signing Request
        Upload a New Certificate Authority for SAML Signing Certificates
      Disable Prompt for Downloading Helper Applications
      Creating Clients to Enable Access to Remote Applications
        Create Remote Access to a Single Catalog Resource
        Create Remote Access Template
      Editing ICA Properties in Citrix Published Applications
      Enabling Application Approval for Resource Usage
        Set up Approval Workflow and Configure the Approval Engine
  Working in the Administration Console Dashboard
    Monitor Users and Resource Usage from the Dashboard
    Viewing Reports
      Generate an Audit Event Report
  Custom Branding for VMware Identity Manager Services
    Customize Branding in VMware Identity Manager Service
    Customize Branding for the User Portal
    Customize Branding for VMware Verify Application
  Integrating AirWatch With VMware Identity Manager
    Setting up AirWatch for Integration with VMware Identity Manager
      Create REST API Keys in AirWatch
      Create Admin Account and Certificate in AirWatch
    Setting up an AirWatch Instance in VMware Identity Manager
      Mapping VMware Identity Manager Domains to Multiple Organization Groups in AirWatch
      Add AirWatch Settings to VMware Identity Manager
    Enable Unified Catalog for AirWatch
    Implementing Authentication with AirWatch Cloud Connector
      Managing User Attributes Mapping
      Sync Users and Groups from AirWatch Directory to VMware Identity Directory
      Updating VMware Identity Manager after Upgrading AirWatch
    Implementing Mobile Single Sign-in Authentication for AirWatch-Managed iOS Devices
      Configure Active Directory Certificate Authority in AirWatch
        Configuring AirWatch to use Active Directory Certificate Authority
        Add Certificate Template in AirWatch
        Configure Apple iOS Profile in AirWatch Using Active Directory Certificate Authority and Certificate Template
      Using AirWatch Certificate Authority for Kerberos Authentication
        Enable and Export the AirWatch Certificate Authority
      Configure Apple iOS Profile in AirWatch Using AirWatch Certificate Authority
    Implementing Mobile Single Sign-On Authentication for AirWatch-Managed Android Devices
      Configure Single-Sign-on for Android Device from AirWatch Admin Console
      Configure AirWatch Tunnel VPN Access Settings from AirWatch Admin Console
      Configure Per App Tunnel Profile for Android
      Enable Per-App VPN for Android Apps
      Configure Traffic Rules in AirWatch
    Enabling Compliance Checking for AirWatch Managed Devices
      Configure Access Policy Rule
  Working in VMware Identity Manager Administration Console
    Navigating in the Administration Console
    Identity and Access Management Settings Overview
  Integrating Your Enterprise Directory with VMware Identity Manager
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Change Active Directory Passwords
    Setting up Directory Sync Safeguards
      Configure Directory Sync Safeguards
      Ignore Safeguard Settings to Complete Syncing to the Directory
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrating an LDAP Directory with the Service
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
    Configuring Authentication Method for System Admin Users
  Just-in-Time User Provisioning
    About Just-in-Time User Provisioning
    Preparing for Just-in-Time Provisioning
      Create Local Groups
      Review User Attributes
    Configuring Just-in-Time User Provisioning
    Requirements for SAML Assertions
    Disabling Just-in-Time User Provisioning
    Deleting a Just-in-Time Directory
    Error Messages
  Managing the User Login Experience
    Login Experience Using Unique Identifier
      Set Up Unique Identifier-Based Log In
    Requiring Terms of Use to Access the Workspace ONE Catalog
      Set Up and Enable Terms of Use
      View Status of Terms of Use Acceptance
  Configuring User Authentication in VMware Identity Manager
    Configuring Kerberos for VMware Identity Manager
      Implementing Kerberos for Desktops with Integrated Windows Authentication
        Configure Kerberos Authentication for Desktops with Integrated Windows Authentication
        Configuring your Browser for Kerberos
          Configure Internet Explorer to Access the Web Interface
          Configure Firefox to Access the Web Interface
          Configure the Chrome Browser to Access the Web Interface
    Configuring SecurID for VMware Identity Manager
      Prepare the RSA SecurID Server
      Configure RSA SecurID Authentication
    Configuring RADIUS for VMware Identity Manager
      Prepare the RADIUS Server
      Configure RADIUS Authentication in VMware Identity Manager
    Configuring RSA Adaptive Authentication in VMware Identity Manager
      Configure RSA Adaptive Authentication in Identity Manager
    Configuring a Certificate or Smart Card Adapter for Use with VMware Identity Manager
      Using User Principal Name for Certificate Authentication
      Certificate Authority Required for Authentication
      Using Certificate Revocation Checking
      Configure Certificate-based Authentication
    Configuring VMware Verify for Two-Factor Authentication
      Enable VMware Verify
      Registering End Users with VMware Verify
      Remove Registered Phone Number from User Profile
    Using Built-in Identity Providers
      Configuring Authentication Methods for Built-In Identity Providers
        Configure Password Authentication to AirWatch
        Enabling Compliance Checking for AirWatch Managed Devices
          Enable Compliance Checking
        Configure the Local Directory Password Authentication Method
        Configure Certificate-based Authentication
        Configuring Mobile SSO for iOS Authentication in the Built-in Identity Provider
          Using the Cloud Hosted KDC Service
          Configure Mobile SSO for iOS Authentication in the Built-In Identity Provider
        Configure Mobile SSO for Android Authentication in the Built-in Identity Provider
      Configure Built-in Identity Providers
      Using Outbound Connector for Authentication in Built-in Identity Providers
      Configure a Built-in Identity Provider with Authentication Methods Configured on an Outbound-Only Connector
    Configure Additional Workspace Identity Providers
    Configuring a Third-Party Identity Provider Instance to Authenticate Users
      Add and Configure an Identity Provider Instance
    Managing Authentication Methods to Apply to Users
      Add or Edit a Network Range
      Applying the Default Access Policy
        Apply Authentication Methods to Policy Rules
  Managing Access Policies
    Configuring Access Policy Settings
    Managing Web and Desktop Application-Specific Policies
    Add a Web or Desktop Application-Specific Policy
    Configure Custom Access Denied Error Message
    Edit Default Access Policy
    Enabling Compliance Checking for AirWatch Managed Devices
      Configure Access Policy Rule
    Enabling Persistent Cookie on Mobile Devices
      Enable Persistent Cookie
  Managing Users and Groups
    User and Group Types
    About User Names and Group Names
      Sync Directory to Correct Domain Information
    Managing Users
    Create Groups and Configure Group Rules
    Edit Group Rules
    Add Resources to Groups
    Create Local Users
      Add Local Users
      Disable or Enable Local Users
      Delete Local Users
    Managing Passwords
      Configure Password Policy for Local Users
  Managing the Catalog
    Managing Resources in the Catalog
      Adding Web Applications to Your Catalog
        Add Web Applications to your Catalog
      Adding Citrix Published Applications
      Adding Horizon Air Applications
    Grouping Resource into Categories
      Create a Resource Category
      Apply a Category to Resources
      Remove a Category from an Application
      Delete a Category
    Managing Catalog Settings
      SAML Signing Certificates
        Download SAML Certificates to Configure with Relying Applications
        Generate a Certificate Signing Request
        Upload a New Certificate Authority for SAML Signing Certificates
      Disable Prompt for Downloading Helper Applications
      Creating Clients to Enable Access to Remote Applications
        Create Remote Access to a Single Catalog Resource
        Create Remote Access Template
      Editing ICA Properties in Citrix Published Applications
      Enabling Application Approval for Resource Usage
        Set up Approval Workflow and Configure the Approval Engine
  Working in the Administration Console Dashboard
    Monitor Users and Resource Usage from the Dashboard
    Viewing Reports
      Generate an Audit Event Report
  Custom Branding for VMware Identity Manager Services
    Customize Branding in VMware Identity Manager Service
    Customize Branding for the User Portal
    Customize Branding for VMware Verify Application
  Integrating AirWatch With VMware Identity Manager
    Setting up AirWatch for Integration with VMware Identity Manager
      Create REST API Keys in AirWatch
      Create Admin Account and Certificate in AirWatch
    Setting up an AirWatch Instance in VMware Identity Manager
      Mapping VMware Identity Manager Domains to Multiple Organization Groups in AirWatch
      Add AirWatch Settings to VMware Identity Manager
    Enable Unified Catalog for AirWatch
    Implementing Authentication with AirWatch Cloud Connector
      Managing User Attributes Mapping
      Sync Users and Groups from AirWatch Directory to VMware Identity Directory
      Updating VMware Identity Manager after Upgrading AirWatch
    Implementing Mobile Single Sign-in Authentication for AirWatch-Managed iOS Devices
      Configure Active Directory Certificate Authority in AirWatch
        Configuring AirWatch to use Active Directory Certificate Authority
        Add Certificate Template in AirWatch
        Configure Apple iOS Profile in AirWatch Using Active Directory Certificate Authority and Certificate Template
      Using AirWatch Certificate Authority for Kerberos Authentication
        Enable and Export the AirWatch Certificate Authority
      Configure Apple iOS Profile in AirWatch Using AirWatch Certificate Authority
    Implementing Mobile Single Sign-On Authentication for AirWatch-Managed Android Devices
      Configure Single-Sign-on for Android Device from AirWatch Admin Console
      Configure AirWatch Tunnel VPN Access Settings from AirWatch Admin Console
      Configure Per App Tunnel Profile for Android
      Enable Per-App VPN for Android Apps
      Configure Traffic Rules in AirWatch
    Enabling Compliance Checking for AirWatch Managed Devices
      Configure Access Policy Rule
Setting Up Resources in VMware Identity Manager (SaaS)
  Introduction to Setting Up Resources in VMware Identity Manager
  Providing Access to Web Applications
    Adding Web Applications to Your Organization's Catalog
      Add a Web Application to Your Catalog from the Cloud Application Catalog
      Add Web Application to Your Catalog to Match Application Records
        Add a Web Application to Your Catalog That Uses SAML Post Authentication
        Add Web Applications That Use HTTP Basic Authentication Profile
        Add Web Applications That Use HTML Forms Authentication
      Add a Web Application to Your Catalog by Importing a ZIP or JAR File
    Entitling Users and Groups to Web Applications
    Using Provisioning Adapters
      Configure a Provisioning Adapter
      Enable or Disable a Provisioning Adapter
      View the Provisioning Status Report
      Example: Using the Google Apps Provisioning Adapter
        Configure a Google Service Account
        Configure the Google Apps Provisioning Adapter
        Provision Users in Google
        Provision Groups in Google
        Deprovision Groups in Google
        Enable or Disable the Google Apps Provisioning Adapter
    Additional Information
  Providing Access to View, Horizon 6, or Horizon 7 Desktop and Application Pools
    Deployment Scenario
    Integrating Independent View Pods
      Set up View
      Join Active Directory Domain
      Add Horizon View Pods to VMware Identity Manager and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Integrating View Cloud Pod Architecture (CPA) Deployments
      Requirements for Integrating View Pod Federations
      Set up Your VMware Identity Manager Environment
      Add a Cloud Pod Federation and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Enabling Multiple Client Access URLs for Custom Network Ranges
    Viewing the Connection Information for View Desktop and Application Pools
    Viewing User and Group Entitlements to View Desktop and Application Pools
    Setting the Deployment Type for View Entitlements
    Viewing Launch Options for View Desktops and Applications
    Launching a View Desktop or Application
    Allowing Users to Reset Their View Desktops in VMware Identity Manager
    Setting Access Policies for Specific Applications and Desktops
    Reducing Resource Usage and Increasing Performance of VMware Identity Manager Desktop in Non-Persistent View Desktops
  Providing Access to VMware Horizon Cloud Service
    Integrating Horizon Cloud Desktops and Applications
      Deployment Scenario for Horizon Cloud Integration
      Prerequisites for Integration
      Enable Horizon Cloud Desktops and Applications in VMware Identity Manager
      Configure SAML Authentication
        Create Federation Artifact for Horizon Cloud
        Configure SAML Authentication in the Horizon Cloud Tenant
      Customizing the User ID for Horizon Cloud Integration
      Syncing Horizon Cloud Desktops and Applications with VMware Identity Manager
    Viewing Details of Horizon Cloud Desktop and Application Pools
    Viewing User and Group Entitlements to Horizon Cloud Desktops and Applications
    Setting Access Policies for Specific Applications and Desktops
    Setting the Deployment Type for Horizon Cloud Entitlements
    Launching a Horizon Cloud Desktop or Application
  Providing Access to VMware ThinApp Packages
    Integrating VMware ThinApp Packages
      VMware Identity Manager Requirements for ThinApp Packages and the Network Share Repository
      Create a Network Share for ThinApp Packages
      Configuring VMware Identity Manager Access to ThinApp Packages
    Entitle Users and Groups to ThinApp Packages
    Distributing and Managing ThinApp Packages
      Offline Grace Period and ThinApp Packages
    Updating Managed ThinApp Packages After Deployment in VMware Identity Manager
      Update a Managed ThinApp Package
        Obtain the AppID and VersionID values of a Managed ThinApp Package
        Create the Updated ThinApp Package
        Copy an Updated ThinApp Package to the Network Share
    Delete ThinApp Packages from VMware Identity Manager
    Make Existing ThinApp Packages Compatible with VMware Identity Manager
    Change the ThinApp Packages Share Folder
    Setting Access Policies for Specific Applications and Desktops
  Configuring VMware Identity Manager Desktop
    Command-Line Installer Options for VMware Identity Manager Desktop
    Install the Windows Application with Identical Settings to Multiple Systems
    Add VMware Identity Manager Desktop Installer Files to VMware Identity Manager Virtual Appliances
    Using the Command-Line hws-desktop-ctrl.exe Application
  Providing Access to Citrix-Published Resources
    Overview
    Components Required for Citrix Integration
    High-level Integration Design
      Synchronization of Citrix-published Resources and Entitlements
      Launch of Citrix-published Applications and Desktops
    Prerequisites for Citrix Integration
      About Deploying the Integration Broker
      Prepare Windows Server for the Integration Broker Installation
        Add Windows Server Roles and Features
        Install Microsoft Visual J# 2.0 64-bit Redistributable Package
      Deploy Integration Broker
        Install Integration Broker
        Configure IIS Manager Settings
        Set HTTPS Site Binding for the Integration Broker
          Example: Create a Self-Signed Certificate Using IIS Manager
          Example: Create a Self-signed Certificate Using OpenSSL
      Enable Citrix PowerShell Remoting
        Install Citrix PowerShell SDK on the Integration Broker Server
        Enable Citrix PowerShell Remoting on the Citrix Server Farm
          Setting up Citrix PowerShell Remoting on Citrix Server Farm 5.0 or 6.0
      Verify the Connection to the Citrix Server Farm
      Download Citrix Web Interface SDK 5.4
    Configuring Citrix Server Farms in VMware Identity Manager
    Configuring Citrix Resource Launch in VMware Identity Manager
      Configuring Resource Launch for Internal Network
      Configuring Resource Launch for External Networks with NetScaler
        Configuring NetScaler Settings in VMware Identity Manager
        Configure Network Range for NetScaler
    Configuring VMware Identity Manager Settings for Citrix Integration
      Setting the Deployment Type for Citrix Entitlements
      Managing Categories for Citrix-Published Resources
      Configuring Delivery Settings (ICA Properties) for Citrix-Published Resources
        Edit Resource Delivery Settings Globally for All Citrix-Published Resources
        Edit the Delivery Settings for a Single Citrix-Published Resource
        Editing ICA Properties for NetScaler
      Setting Access Policies for Specific Applications and Desktops
      Viewing User and Group Entitlements to Citrix-Published Resources
      Launching Citrix-Published Resources in Different Browsers
    Upgrade Impact on Citrix-Published Resources Integration
  Troubleshooting VMware Identity Manager Resource Configuration
    Troubleshooting ThinApp Integration
      ThinApp Packages Fail to Launch from the User Portal
    Troubleshooting Horizon Integration
      Unable to Synchronize View Resources
      Users Unable to Launch View Applications or Desktops
    Troubleshooting Citrix-Published Resources Integration
      Users Accessing Citrix-Published Resources Receive an Encryption Error
      Citrix-Published Resources Are Not Available in VMware Identity Manager
      When Users Launch a Citrix-Published Resource, the Browser Displays 500 Internal Server Error
      Memory Issue Prevents Proper Configuration of Integration Broker
      Resource Not Available Error while Launching XenApp 7.x Desktops
      Unable to Launch Desktop from Citrix XenDesktop Farm on Windows 7
      Launch of Citrix-published Resources Fails if XML Port is Set Incorrectly
      Citrix Resource Sync Fails if Limited Visibility Group Does Not Contain Any Users or Groups
      Sync Issues if Published Applications or Desktops in a Site Do Not Contain Valid Users
      Citrix Entitlements do not Appear in VMware Identity Manager
      Exception During Sync if Application Pool Identity is not Configured
      ICA File is not Created During Citrix Resource Launch
      Restarting Integration Broker
  Introduction to Setting Up Resources in VMware Identity Manager
  Providing Access to Web Applications
    Adding Web Applications to Your Organization's Catalog
      Add a Web Application to Your Catalog from the Cloud Application Catalog
      Add Web Application to Your Catalog to Match Application Records
        Add a Web Application to Your Catalog That Uses SAML Post Authentication
        Add Web Applications That Use HTTP Basic Authentication Profile
        Add Web Applications That Use HTML Forms Authentication
      Add a Web Application to Your Catalog by Importing a ZIP or JAR File
    Entitling Users and Groups to Web Applications
    Using Provisioning Adapters
      Configure a Provisioning Adapter
      Enable or Disable a Provisioning Adapter
      View the Provisioning Status Report
      Example: Using the Google Apps Provisioning Adapter
        Configure a Google Service Account
        Configure the Google Apps Provisioning Adapter
        Provision Users in Google
        Provision Groups in Google
        Deprovision Groups in Google
        Enable or Disable the Google Apps Provisioning Adapter
    Additional Information
  Providing Access to View, Horizon 6, or Horizon 7 Desktop and Application Pools
    Deployment Scenario
    Integrating Independent View Pods
      Set up View
      Join Active Directory Domain
      Add Horizon View Pods to VMware Identity Manager and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Integrating View Cloud Pod Architecture (CPA) Deployments
      Requirements for Integrating View Pod Federations
      Set up Your VMware Identity Manager Environment
      Add a Cloud Pod Federation and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Enabling Multiple Client Access URLs for Custom Network Ranges
    Viewing the Connection Information for View Desktop and Application Pools
    Viewing User and Group Entitlements to View Desktop and Application Pools
    Setting the Deployment Type for View Entitlements
    Viewing Launch Options for View Desktops and Applications
    Launching a View Desktop or Application
    Allowing Users to Reset Their View Desktops in VMware Identity Manager
    Setting Access Policies for Specific Applications and Desktops
    Reducing Resource Usage and Increasing Performance of VMware Identity Manager Desktop in Non-Persistent View Desktops
  Providing Access to VMware Horizon Cloud Service
    Integrating Horizon Cloud Desktops and Applications
      Deployment Scenario for Horizon Cloud Integration
      Prerequisites for Integration
      Enable Horizon Cloud Desktops and Applications in VMware Identity Manager
      Configure SAML Authentication
        Create Federation Artifact for Horizon Cloud
        Configure SAML Authentication in the Horizon Cloud Tenant
      Customizing the User ID for Horizon Cloud Integration
      Syncing Horizon Cloud Desktops and Applications with VMware Identity Manager
    Viewing Details of Horizon Cloud Desktop and Application Pools
    Viewing User and Group Entitlements to Horizon Cloud Desktops and Applications
    Setting Access Policies for Specific Applications and Desktops
    Setting the Deployment Type for Horizon Cloud Entitlements
    Launching a Horizon Cloud Desktop or Application
  Providing Access to VMware ThinApp Packages
    Integrating VMware ThinApp Packages
      VMware Identity Manager Requirements for ThinApp Packages and the Network Share Repository
      Create a Network Share for ThinApp Packages
      Configuring VMware Identity Manager Access to ThinApp Packages
    Entitle Users and Groups to ThinApp Packages
    Distributing and Managing ThinApp Packages
      Offline Grace Period and ThinApp Packages
    Updating Managed ThinApp Packages After Deployment in VMware Identity Manager
      Update a Managed ThinApp Package
        Obtain the AppID and VersionID values of a Managed ThinApp Package
        Create the Updated ThinApp Package
        Copy an Updated ThinApp Package to the Network Share
    Delete ThinApp Packages from VMware Identity Manager
    Make Existing ThinApp Packages Compatible with VMware Identity Manager
    Change the ThinApp Packages Share Folder
    Setting Access Policies for Specific Applications and Desktops
  Configuring VMware Identity Manager Desktop
    Command-Line Installer Options for VMware Identity Manager Desktop
    Install the Windows Application with Identical Settings to Multiple Systems
    Add VMware Identity Manager Desktop Installer Files to VMware Identity Manager Virtual Appliances
    Using the Command-Line hws-desktop-ctrl.exe Application
  Providing Access to Citrix-Published Resources
    Overview
    Components Required for Citrix Integration
    High-level Integration Design
      Synchronization of Citrix-published Resources and Entitlements
      Launch of Citrix-published Applications and Desktops
    Prerequisites for Citrix Integration
      About Deploying the Integration Broker
      Prepare Windows Server for the Integration Broker Installation
        Add Windows Server Roles and Features
        Install Microsoft Visual J# 2.0 64-bit Redistributable Package
      Deploy Integration Broker
        Install Integration Broker
        Configure IIS Manager Settings
        Set HTTPS Site Binding for the Integration Broker
          Example: Create a Self-Signed Certificate Using IIS Manager
          Example: Create a Self-signed Certificate Using OpenSSL
      Enable Citrix PowerShell Remoting
        Install Citrix PowerShell SDK on the Integration Broker Server
        Enable Citrix PowerShell Remoting on the Citrix Server Farm
          Setting up Citrix PowerShell Remoting on Citrix Server Farm 5.0 or 6.0
      Verify the Connection to the Citrix Server Farm
      Download Citrix Web Interface SDK 5.4
    Configuring Citrix Server Farms in VMware Identity Manager
    Configuring Citrix Resource Launch in VMware Identity Manager
      Configuring Resource Launch for Internal Network
      Configuring Resource Launch for External Networks with NetScaler
        Configuring NetScaler Settings in VMware Identity Manager
        Configure Network Range for NetScaler
    Configuring VMware Identity Manager Settings for Citrix Integration
      Setting the Deployment Type for Citrix Entitlements
      Managing Categories for Citrix-Published Resources
      Configuring Delivery Settings (ICA Properties) for Citrix-Published Resources
        Edit Resource Delivery Settings Globally for All Citrix-Published Resources
        Edit the Delivery Settings for a Single Citrix-Published Resource
        Editing ICA Properties for NetScaler
      Setting Access Policies for Specific Applications and Desktops
      Viewing User and Group Entitlements to Citrix-Published Resources
      Launching Citrix-Published Resources in Different Browsers
    Upgrade Impact on Citrix-Published Resources Integration
  Troubleshooting VMware Identity Manager Resource Configuration
    Troubleshooting ThinApp Integration
      ThinApp Packages Fail to Launch from the User Portal
    Troubleshooting Horizon Integration
      Unable to Synchronize View Resources
      Users Unable to Launch View Applications or Desktops
    Troubleshooting Citrix-Published Resources Integration
      Users Accessing Citrix-Published Resources Receive an Encryption Error
      Citrix-Published Resources Are Not Available in VMware Identity Manager
      When Users Launch a Citrix-Published Resource, the Browser Displays 500 Internal Server Error
      Memory Issue Prevents Proper Configuration of Integration Broker
      Resource Not Available Error while Launching XenApp 7.x Desktops
      Unable to Launch Desktop from Citrix XenDesktop Farm on Windows 7
      Launch of Citrix-published Resources Fails if XML Port is Set Incorrectly
      Citrix Resource Sync Fails if Limited Visibility Group Does Not Contain Any Users or Groups
      Sync Issues if Published Applications or Desktops in a Site Do Not Contain Valid Users
      Citrix Entitlements do not Appear in VMware Identity Manager
      Exception During Sync if Application Pool Identity is not Configured
      ICA File is not Created During Citrix Resource Launch
      Restarting Integration Broker
PDF Product Documentation
  PDF Product Documentation
  PDF Product Documentation