You can view information about all the storage volumes connected to the Horizon Mirage Management system.

You can view certain information about each storage volume, such as volume state, location, description, metrics, and status.

Horizon Mirage Storage Volume Parameters

Parameter

Description

ID

Unique volume identification number set by the Horizon Mirage Management system.

Name

Volume name assigned when the volume was added.

Volume State

Current state of the storage volume.

Mounted. Volume is reachable and accessible.

Malfunctioned. Volume is currently unreachable and inaccessible. CVDs and base layers on this volume cannot be accessed or used until the volume status is restored to Mounted. A manual action is needed to correct the problem.

Run an SIS volume integrity check before returning the volume to the active state. See Maintain Storage Volumes.

Unmounted. Volume was temporarily disconnected by the administrator using the Unmount Volume function. See Remove or Unmount Storage Volumes.

Removing. Volume is in the process of removal from the system.

Path

UNC or local path where the volume resides.

Description

Description of the storage volume assigned when the volume was added. You can edit the volume information. See Edit Storage Volume Information.

Capacity (GB)

Storage volume capacity in gigabytes.

Free Space (GB)

Amount of free space in gigabytes available on the storage volume.

Number of CVDs

Number of CVDs stored on the storage volume.

Number of Base Layers

Number of base layers and base layer versions stored on the storage volume.

Status

Status of the storage volume.

(blank). The storage volume is available.

Blocked. The storage volume is not used when creating new CVDs and base layers, but continues to serve existing stored entities. See Block Storage Volumes.

In the Management console tree, expand the System Configuration node and select Volumes.