During installation, you configure the DB Name Service Network and the DB Name Service Network Adapter. You can later reconfigure the DB Name Service Network or the DB Name Service Network Adapter by editing the settings in the Data Director UI.

Review the information about network settings in Data Director in the vFabric Data Director Installation Guide.

1

Log in to Data Director as a system administrator, click the System tab, and select Administration.

2

Click the Network Setup tab, and click Edit Network Setup.

3

Click Next to skip vCenter Network setup.

4

To reconfigure the DB Name Service Network mapping, select the appropriate network mapping in the DB Name Service Network drop-down menu, and click Next.

5

(Optional) Click Finish if you are not reconfiguring the DB Name Service Network Adapter or modify the adapter.

a

To enable or disable DHCP or Static IP addressing, click Edit next to the network name.

b

Toggle the DHCP check box to enable or disable DHCP.

c

Toggle the Static IP check box to enable or disable static IP, and enter the netmask in the Netmask text box if Static IP is enabled.

d

Click OK.

e

In the DB Name Server - DB Name Service Network Adapter section, select DHCP or Static IP.

If you select Static IP, enter the IP address and FQDN.

6

Click Finish to commit your changes.