You can reconfigure the Internal Network or the Internal Network Adapter by editing the settings in the Data Director UI. You can change Internal Network and Internal Network Adapter settings only when all database virtual machines are powered down.

Review the information about network settings in Data Director in the vFabric Data Director Installation Guide.

1

Log in to Data Director as an administrator, and turn off all database virtual machines (DBVMs) by powering down all databases.

2

Click the System tab, and select System Settings.

3

Expand Other Settings, and click Network.

4

Click Edit Network Settings.

5

Click Next to skip vCenter Network setup.

6

To reconfigure the Internal Network mapping, select the network mapping in the Internal Network drop-down menu and click Next.

7

To enable or disable DHCP, Static IP, or IP Pool addressing for the network, click Edit next to the network name.

Option

Description

DHCP

Check the DHCP box to enable DHCP.

Static IP

Check the Static IP box to enable static IP, and enter the netmask.

IP Pool

Check the IP Pool box to enable IP Pool addressing. Enabling IP Pool addressing enables Static IP. If no IP address range is configured, click the green plus icon and add and IP address range.

8

Click OK.

9

To modify the internal network adapter settings for the Management Server - Internal Network Adapter, or the DB Name Server - Internal Network Adapter, select one of the following options.

Option

Description

DHCP

Check the DHCP box to enable DHCP, and enter a FQDN.

Satic IP

Check the Static IP box to enable static IP addressing, and enter the IP address and an FQDN.

IP Pool

Check the IP Pool box to enable IP pools

If DHCP and IP Pool are both enabled, select one for the DBVM Servers–DB Internal Network Adapters, and one for the Management Server - Internal Network Adapter.

10

Click Finish to accept your changes.

11

Turn on all the DBVMs by powering on all the databases.

12

Log in to vSphere Client as an administrator, and verify the network settings.

a

Right-click the DB Name Server virtual machine and select Edit Settings.

b

Click Network Adapter 2.

The Network Adapter 2 Network label matches the change you made.