During installation, you configure the Web Console Network mapping and the Web Console Network adapter. You can later reconfigure the Web Console Network mapping by editing the network settings of the Management Server virtual machine in vSphere Client.

Review the information about network settings in Data Director in the vFabric Data Director Installation Guide.

1

Log in to the vSphere Client as an administrator, and select Inventory > Hosts and Clusters.

2

Select and expand the Data Director vApp.

3

Right-click the Management Server virtual machine, and select Power > Power Off.

4

Reconfigure the vSphere network that the Web Console Network maps to.

a

In the vSphere Client, right-click the Management Server and select Edit Settings.

b

Click the Hardware tab, and click Network adapter 1.

c

Select Network Connection > Network Label.

d

Select the appropriate network and click OK.

5

Reconfigure the Web Console Network Adapter.

a

In the vSphere Client, right-click the Management Server and select Edit Settings.

b

Click the Options tab.

c

Select vApp Options > Properties.

d

Change the settings for FQDN, static IP address, netmask, DNS Server 1, or DNS Server 2, as appropriate.

e

Click OK.

6

Right-click the Management Server virtual machine, and select Power > Power On.

Verify the settings from the Data Director UI. See Verify Network Settings in Data Director.