You can configure your WatchGuard Firebox X500 as a remote gateway.

Note

Refer to your WatchGuard Firebox documentation for exact steps.

1

In Firebox System Manager, select Tools > Policy Manager > .

2

In Policy Manager, select Network > Configuration.

3

Configure the interfaces and click OK.

4

(Optional) Select Network > Routes to configure a default route.

5

Select Network > Branch Office VPN > Manual IPSec to configure the remote gateway.

6

In the IPSec Configuration dialog box, click Gateways to configure the IPSEC Remote Gateway.

7

In the IPSec Configuration dialog box, click Tunnels to configure a tunnel.

8

In the IPSec Configuration dialog box, click Add to add a routing policy.

9

Click Close.

10

Confirm that the tunnel is up.