Generic SCSI devices use the virtual Mylex (BusLogic) BT/KT-958 compatible host bus adapter provided by the virtual machine. On Windows NT 4.0, you might need to install the driver manually if it is not already installed for a virtual SCSI disk. Install the driver before you add a generic SCSI device.

Verify that the Windows NT installation CD is available.

1

Select Start > Settings > Control Panel > SCSI Adapters to open the SCSI Adapters control panel.

2

On the Drivers tab, click Add.

3

From the list of vendors, select BusLogic.

4

From the list of drivers, select BusLogic MultiMaster PCI SCSI Host Adapters and click OK.

5

Insert the Windows NT CD and click OK.

6

Reboot the virtual machine.