After you deploy the vCenter Server Appliance, you can edit the DNS settings and specify which DNS server to use. You can also edit the IP address settings of the vCenter Server Appliance, specify whether to use IPv4 and IPv6 or only IPv6, and how the appliance obtains the IP address.

You can edit these settings by using the vSphere Web Client.

To change the IP address of the appliance, verify that the system name of the appliance is an FQDN. If, during the deployment of the appliance, you set an IP address as a system name, you cannot change the IP address after the deployment, because the system name is used as a primary network identifier.

Verify that the user name you use to log in to the vCenter Server instance in the vCenter Server Appliance is a member of the SystemConfiguration.Administrators group in vCenter Single Sign-On.

1

Use the vSphere Web Client to log in as administrator@your_domain_name to the vCenter Server instance in the vCenter Server Appliance.

The address is of the type http://appliance-IP-address-or-FQDN/vsphere-client.

2

On the vSphere Web Client Home page, click System Configuration.

3

Under System Configuration, click Nodes.

4

Under Nodes, select a node and click the Manage tab.

5

Under Common , select Networking, and click Edit.

6

Expand DNS and edit the settings.

Option

Description

Obtain DNS server address automatically

Obtains the DNS settings automatically from the network.

Enter settings manually

Lets you specify the DNS address settings manually. If you select this option, you must provide:

Hostname

Name of the vCenter Server Appliance machine.

Preferred DNS server

IP address of the preferred DNS server.

Alternate DNS server

IP address of the alternate DNS server.

Search domains

Restricts the domain when looking up an address. Domains that you type, are searched in the order you list them, and the search stops when a valid name is found.

7

Expand the network interface name to edit the IP address settings.

8

Edit the IPv4 address settings.

Option

Description

No IPv4 settings

Disables the IPv4 address. The appliance uses only an IPv6 address.

Obtain IPv4 settings automatically

Obtains the IPv4 address for the appliance automatically from the network .

Use the following IPv4 settings

Uses an IPv4 address that you set manually. You must enter the IP address, subnet prefix length, and the default gateway.

9

Edit the IPv6 settings.

Option

Description

Obtain IPv6 settings automatically through DHCP

Assigns IPv6 addresses to the appliance automatically from the network by using DHCP.

Obtain IPv6 settings automatically through Router Advertisement

Assigns IPv6 addresses to the appliance automatically from the network by using router advertisement.

Static IPv6 addresses

Uses static IPv6 addresses that you set up manually.

1

Click the Add icon.

2

Enter the IPv6 address and the subnet prefix length.

3

Click OK.

4

(Optional) Edit the default gateway.

You can configure the appliance to obtain the IPv6 settings automatically through both DHCP and router advertisement. You can assign static IPv6 address at the same time.

10

(Optional) Delete a dynamic IPv6 address.

a

Click Remove addresses.

b

Select the IP address to delete and click the Delete icon ().

c

Click OK.

11

Click OK to save your edits.