When you configure a virtual flash resource that is consumed by ESXi hosts and virtual machines, several considerations apply.

You can have only one virtual flash resource, also called a VFFS volume, on a single ESXi host. The virtual flash resource is managed only at the host's level.

You cannot use the virtual flash resource to store virtual machines. Virtual flash resource is a caching layer only.

You can use only local flash devices for the virtual flash resource.

You can create the virtual flash resource from mixed flash devices. All device types are treated the same and no distinction is made between SAS, SATA, or PCI express connectivity. When creating the resource from mixed flash devices, make sure to group similar performing devices together to maximize performance.

You cannot use the same flash devices for the virtual flash resource and Virtual SAN. Each requires its own exclusive and dedicated flash device.

After you set up a virtual flash resource, the total available capacity can be used and consumed by both ESXi hosts as host swap cache and virtual machines as read cache.

You cannot choose individual flash devices to be used for either swap cache or read cache. All flash devices are combined into a single flash resource entity.