NetQueue is enabled by default.

Familiarize yourself with the information on configuring NIC drivers in Getting Started with vSphere Command-Line Interfaces.

1

In the VMware vSphere CLI, use the following command depending on the host version:

esxcli system settings kernel set --setting="netNetqueueEnabled" --value="FALSE"
2

To disable NetQueue on the NIC driver, use the esxcli module parameters set command.

For example, on a dual-port Emulex NIC, run this ESXCLI commands to configure the driver with 1 receive queues.

esxcli system module parameters set -m tg3 -p force_netq=1,1
3

Reboot the host.