With the software-based iSCSI implementation, you can use standard NICs to connect your host to a remote iSCSI target on the IP network. The software iSCSI adapter that is built into ESXi communicates with the physical NICs through the network stack.

Note

Before you can use the software iSCSI adapter, you must set up networking, activate the adapter, and configure parameters such as CHAP.

The iSCSI adapter configuration workflow includes the following procedures:

Enabling iSCSI on your host. SeeEnable iSCSI for an ESXi Host in the VMware Host Client

Adding a port binding. See Add Port Binding in the VMware Host Client

Removing port binding. SeeRemove Port Binding in the VMware Host Client