You can set up an IP address range by specifying a host address range within a network.

IP pool ranges are configured with IPv4 and IPv6. vCenter Server uses these ranges to dynamically allocate IP addresses to virtual machines when a vApp is set up to use transient IP allocation.

1

In the inventory, select the datacenter that contains the vApp.

2

In the IP Pools tab, right-click the IP pool that you want to edit and select Properties.

If no IP pools appear, click Add to add a new IP pool.

3

In the Properties dialog box, select the IPv4 or the IPv6 tab, depending on your IP protocol.

4

Enter the IP Subnet and Gateway in their respective fields.

5

(Optional) Select the Enable IP Pool check box.

Enable this setting to specify an IP address range.

6

(Optional) Enter a comma-separated list of host address ranges in the Ranges field.

A range consists of an IP address, a pound sign (#), and a number indicating the length of the range.

The gateway and the ranges must be within the subnet, but must exclude the gateway address.

For example, 10.20.60.4#10, 10.20.61.0#2 indicates that the IPv4 addresses can range from 10.20.60.4 to 10.209.60.13 and 10.20.61.0 to 10.20.61.1.

7

Click OK.