The -L option allows you to perform administrative task for physical storage devices. You can perform most of these tasks through the vSphere Client.

-L --lock [reserve|release|lunreset|targetreset|busreset]device

This option lets you reserve a SCSI LUN for exclusive use by an ESX host, release a reservation so that other hosts can access the LUN, and reset a reservation, forcing all reservations from the target to be released.

Caution

Using the -L option can interrupt the operations of other servers on a SAN. Use the -L option only when troubleshooting clustering setups.

Unless specifically advised by VMware, never use this option on a LUN hosting a VMFS volume.

You can specify the -L option in several ways:

-L reserve – Reserves the specified LUN. After the reservation, only the server that reserved that LUN can access it. If other servers attempt to access that LUN, a reservation error results.

-L release – Releases the reservation on the specified LUN. Other servers can access the LUN again.

-L lunreset – Resets the specified LUN by clearing any reservation on the LUN and making the LUN available to all servers again. The reset does not affect any of the other LUNs on the device. If another LUN on the device is reserved, it remains reserved.

-L targetreset – Resets the entire target. The reset clears any reservations on all the LUNs associated with that target and makes the LUNs available to all servers again.

-L busreset – Resets all accessible targets on the bus. The reset clears any reservation on all the LUNs accessible through the bus and makes them available to all servers again.

When entering the device parameter, use the following format:

/vmfs/devices/disks/vml.vml_ID:P