vRealize Log Insight Agent comes pre-installed on the vRealize Business virtual appliances. Configure the liagent.ini configuration file on each virtual appliance.

1

Enable Secure Shell on both the vRealize Business appliances.

a

Open a Web browser and go to the following URLs,

vRealize Business node

Virtual Appliance Management Interface URL

vRealize Business Server Appliance

https://vrb01svr01.rainpole.local:5480

vRealzie Business Data Collector

https://sfo01vrbc01.sfo01.rainpole.local:5480

b

Log in using the following credentials.

Setting

Value

User name

root

Password

vrb_server_root_password

The appliance management interface of the appliance opens.

c

Click the Administration tab and click Administration.

d

Under the Actions section, click Toggle SSH setting.

e

Verify that the SSH service status reports Enabled.

2

Configure the Log Insight agent in on the vRealize Business appliances.

a

Open an SSH connection to the vRealize Business appliance using the following settings.

Setting

Value

Hostname

vrb01svr01.rainpole.local

sfo01vrbc01.sfo01.rainpole.local

User name

root

Password

vrb_server_appliance_root_password

b

Edit the liagent.ini file using a text editor such as vi.

vi /var/lib/loginsight-agent/liagent.ini
c

Add the following information under [server] section

[server]

hostname=sfo01vrli01.sfo01.rainpole.local

proto = cfapi

port = 9000

ssl = no

d

Replace all instances of FQDN_localhost parameter located after agent_name with vrb01svr01.rainpole.local.

e

Press ESC and enter :wq! to save the file.

f

Start the Log Insight agent.

/etc/init.d/liagentd start
g

Verify that the Log Insight agent is running.

/etc/init.d/liagentd status
h

Turn on auto-run by default for the log insight agent.

chkconfig liagentd on
i

Repeat the steps to configure the vRealize Business Data Collector at vra01buc01.sfo01.rainpole.local.

3

Confirm that the Log Insight agents are working in the vRealize Log Insight Web interface.

a

Open a Web browser and go to https://sfo01vrli01.sfo01.rainpole.local.

b

Log in using the following credentials.

Setting

Value

User name

admin

Password

vrli_admin_password

c

Click the configuration drop-down menu icon and select Administration.

d

Under Management, click Agents.

e

Verify that vrb01svr01.rainpole.local and sfo01vrbc01.sfo01.rainpole.local appear on the page.