Deploy and configure the NSX instance for the shared edge and compute cluster in Region B.

1

You must first deploy the NSX Manager virtual appliance. After the NSX Manager is successfully deployed you must connect it to the Compute vCenter Server instance.

2

This validated design instructs that you join the secondary Shared Edge and Compute NSX instance in Region B to the respective primary instance in Region A.

3

You must install the NSX kernel modules on the compute and edge clusters ESXi hosts to be able to use NSX.

4

After all deployment tasks are ready, configure the NSX logical network. 

5

After an authorized change is made to a host the Host Profile must be updated to reflect the changes.

6

NSX for vSphere creates a network virtualization layer on top of which all virtual networks are created. This layer is an abstraction between the physical and virtual networks.

7

Test the configuration of the NSX logical network.

8

After the clusters are fully configured in Region A and Region B, verify that the network connectivity between them works as expected.