Verify that the UDLR is successfully peering, and that BGP routing has been established.

1

Log in to the UDLR by using a Secure Shell (SSH) client.

a

Open an SSH connection to UDLR01, the UDLR whose peering and BGP configuration you want to verify.

b

Log in using the following credentials.

Setting

Value

User name

admin

Password

udlr_admin_password

2

Run the show ip bgp neighbors command to display information about the BGP and TCP connections to neighbors. 

The BGP State will display Established, UP if you have successfully peered with the Edge Service Gateway.


3

Run the show ip route command to verify that you are receiving routes using BGP, and that there are multiple routes to BGP learned networks. 

The letter B before the route indicates that BGP is used.