Install and configure the ESXi hosts for the management cluster and the shared edge and compute cluster by using the same process.

Before you start:

Make sure that you have a Windows host that has access to your data center in Region B. You use this host to connect to your hosts and perform configuration steps.

Ensure that routing is in place between the two regional management networks 172.16.11.0/24 and 172.17.11.0/24 as this will be needed to join the common SSO domain.

You must also prepare the installation files.

Download the ESXi ISO installer.

Create a bootable USB drive that contains the ESXi Installation. See "Format a USB Flash Drive to Boot the ESXi Installation or Upgrade" in vSphere Installation and Setup.

The following tables contain all the values needed to configure your ESXi hosts.

Management Cluster Hosts in Region B

FQDN

IP

Management VLAN

 Default Gateway

NTP Server

mgmt01esx51.lax01.rainpole.local

172.17.11.101

1711

172.17.11.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

mgmt01esx52.lax01.rainpole.local

172.17.11.102

1711

172.17.11.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

mgmt01esx53.lax01.rainpole.local

172.17.11.103

1711

172.17.11.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

mgmt01esx54.lax01.rainpole.local

172.17.11.104

1711

172.17.11.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

Shared Edge and Compute Cluster Hosts in Region B

FQDN

IP

Management VLAN

Default Gateway 

NTP Server

comp01esx51.lax01.rainpole.local

172.17.31.101

1731

172.17.31.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

comp01esx52.lax01.rainpole.local

172.17.31.102

1731

172.17.31.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

comp01esx53.lax01.rainpole.local

172.17.31.103

1731

172.17.31.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local

comp01esx54.lax01.rainpole.local

172.17.31.104

1731

172.17.31.253

ntp.lax01.rainpole.local

ntp.sfo01.rainpole.local