Configure a Network Devices Adapter to monitor the switches and routers in your environment, and view related alerts, metrics and object capacity.

The Network Devices Adapter collects data across all vCenter Server instances that you monitor by using vRealize Operations Manager. In a multi-region environment, you use a single adapter instance to access data for all regions.

To monitor network devices, SNMP must be enabled in your network environment. 

For complete monitoring of your environment, Link Layer Discovery Protocol (LLDP) or Cisco Discovery Protocol (CDP) must also be enabled on each network device.

1

Log in to vRealize Operations Manager by using the administration console.

a

Open a Web browser and go to https://vrops-cluster-01.rainpole.local.

b

Log in using the following credentials.

Setting

Value

User name

admin

Password

vrops_admin_password

2

In the left pane of vRealize Operations Manager, click Administration and click Solutions.

3

On the Solutions page, select the Management Pack for NSX-vSphere from the solution table, and click Configure.


4

In Manage Solution - Management Pack for NSX-vSphere dialog box, from the Adapter Type table at the top, select Network Devices Adapter.

5

Under Instance Settings, enter the settings for SNMP connection to the network devices for the management cluster.

a

Enter the name, SNMP version and credentials.

Setting

Value

Display Name

Network Devices Adapter

Description

-

SNMP Ports

161

SNMP Version

SNMPv2

SNMPv3 Privacy Protocol

AES

SNMPv3 Authentication Protocol

MD5


b

Click the Add icon, and configure the credentials for connecting the Network Devices Adapter to the network devices, and click OK

Credential

Value

Credential Kind

SNMPv1, SNMPv2 Credential

Credential Name

Network Devices Credentials

SNMP Read Community Strings

public

For SNMPv1 and SNMPv2 devices, enter a comma-separated list of community names (default is public).

For SNMPv3 devices, provide SNMPv3 credentials in addition to the settings for SNMPv1 and SNMPv2. 


c

Click Test Connection to verify the settings, and if the test is successful click the OK button.

d

Expand the Advanced Settings section of settings, and verify that the Collectors/Groups option is set to Default collector group.

e

Click Save Settings and click OK in the information box that appears.

6

In the Manage Solution - Management Pack for NSX-vSphere dialog box, click Close.

The Network Devices Adapter appears on the Solutions page of the vRealize Operations Manager user interface. The adapter is collecting data about the network devices in Region A of the SDDC. The Collection State of the adapter is Collecting and the Collection Status is Data receiving.