Import the previously generated certificates for vRealize Business from the vRealize Business appliance management console. 

Verify that you have access to the vRealize Business certificates. For more information, see "Use the Certificate Generation Utility to Generate CA-Signed Certificates for the SDDC Management Components" in the VMware Validated Design Planning and Preparation document.

1

Log in to the vRealize Business Server appliance management console.

a

Open a Web browser and go to https://vra01bus01.rainpole.local:5480.

b

Log in using the following credentials.

Setting

Value

User name

root

Password

vrb_server_root_password

2

Click the Administration tab and click SSL.

3

On the Replace SSL Certificate page, select Import PEM encoded Certificate from the Choose mode drop down menu.

4

Enter the values from the previously-generated certificate for vRealize Business and click Replace Certificate.

Use the vrb.key file as the RSA Private Key (.key) and the vrb.3.pem file for the Certificate(s) (.pem) entry. These files are in the vrb folder that you created during certificate generation.

Setting

Value

Choose mode

Import PEM encoded Certificate

RSA Private Key (.key)

------BEGIN RSA PRIVATE KEY-----
private_key_value
-----END RSA PRIVATE KEY-----

Certificate(s) (.pem)

-----BEGIN CERTIFICATE-----
Server_certificate_value
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
Intermediate_CA
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
Root_CA_certificate_value
-----END CERTIFICATE-----

Private Key Passphrase

vrb_cert_passphrase


5

Verify that the certificate changed successfully.

A message appears that informs you that the SSL certificate was successfully configured.

6

Click the System tab and click Reboot for the changes to take effect.