VMware Identity Manager Cloud Deployment
  Deployment Models
    Deployment Model Using AirWatch Cloud Connector
    Deployment Model Using VMware Identity Manager Connector in Outbound-Only Connection Mode
      Adding Kerberos Authentication Support to Your Deployment
  Preparing to Install VMware Identity Manager Connector
    System and Network Configuration Requirements
    Create DNS Records and IP Addresses
    Deployment Checklists
  Deploying the VMware Identity Manager Connector
    Generate Activation Code for Connector
    Install and Configure the Connector Virtual Appliance
    Set up a Directory
    Enable Authentication Adapters on the Connector
    Enable Outbound Mode for the Connector
  Configuring High Availability for the VMware Identity Manager Connector
    Add Additional Connectors by Installing New Connector Instances
    Add Additional Connectors by Cloning the Connector Virtual Appliance
      Clone the Connector Virtual Appliance
      Assign New IP Address to Cloned Virtual Appliance
    Add New Connector to Built-in Identity Provider
    Enabling Directory Sync on Another Connector in the Event of a Failure
  Adding Kerberos Authentication Support to Your VMware Identity Manager Connector Deployment
    Configuring and Enabling the Kerberos Authentication Adapter
    Configuring High Availability for Kerberos Authentication
      Configure Load Balancer Settings
      Apply VMware Identity Manager Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to the VMware Identity Manager Connector
      Change Connector IdP Host Name to the Load Balancer Host Name
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
    Integrating with Active Directory
      Active Directory Environments
      About Domain Controller Selection (domain_krb.properties file)
        Overriding the Default Subnet Selection
        Editing the domain_krb.properties file
        Troubleshooting domain_krb.properties
      Managing User Attributes that Sync from Active Directory
        Select Attributes to Sync with Directory
      Permissions Required for Joining a Domain
      Configuring Active Directory Connection to the Service
      Enabling Users to Change Active Directory Passwords
    Integrating with LDAP Directories
      Limitations of LDAP Directory Integration
      Integrate an LDAP Directory with the Service
    Adding a Directory After Configuring Failover and Redundancy
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Deleting a VMware Identity Manager Connector Instance
  Deployment Models
    Deployment Model Using AirWatch Cloud Connector
    Deployment Model Using VMware Identity Manager Connector in Outbound-Only Connection Mode
      Adding Kerberos Authentication Support to Your Deployment
  Preparing to Install VMware Identity Manager Connector
    System and Network Configuration Requirements
    Create DNS Records and IP Addresses
    Deployment Checklists
  Deploying the VMware Identity Manager Connector
    Generate Activation Code for Connector
    Install and Configure the Connector Virtual Appliance
    Set up a Directory
    Enable Authentication Adapters on the Connector
    Enable Outbound Mode for the Connector
  Configuring High Availability for the VMware Identity Manager Connector
    Add Additional Connectors by Installing New Connector Instances
    Add Additional Connectors by Cloning the Connector Virtual Appliance
      Clone the Connector Virtual Appliance
      Assign New IP Address to Cloned Virtual Appliance
    Add New Connector to Built-in Identity Provider
    Enabling Directory Sync on Another Connector in the Event of a Failure
  Adding Kerberos Authentication Support to Your VMware Identity Manager Connector Deployment
    Configuring and Enabling the Kerberos Authentication Adapter
    Configuring High Availability for Kerberos Authentication
      Configure Load Balancer Settings
      Apply VMware Identity Manager Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to the VMware Identity Manager Connector
      Change Connector IdP Host Name to the Load Balancer Host Name
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
    Integrating with Active Directory
      Active Directory Environments
      About Domain Controller Selection (domain_krb.properties file)
        Overriding the Default Subnet Selection
        Editing the domain_krb.properties file
        Troubleshooting domain_krb.properties
      Managing User Attributes that Sync from Active Directory
        Select Attributes to Sync with Directory
      Permissions Required for Joining a Domain
      Configuring Active Directory Connection to the Service
      Enabling Users to Change Active Directory Passwords
    Integrating with LDAP Directories
      Limitations of LDAP Directory Integration
      Integrate an LDAP Directory with the Service
    Adding a Directory After Configuring Failover and Redundancy
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Deleting a VMware Identity Manager Connector Instance
VMware Identity Manager Connector Installation and Configuration (Legacy Mode)
  Preparing to Install VMware Identity Manager Connector
    Planning the Deployment Strategy
    General Configuration Requirements
    System and Network Configuration Requirements
    Deployment Checklists
  Deploying VMware Identity Manager Connector
    Create Your Identity Provider
    Deploy the Connector OVA File
    Configure Connector Settings
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Advanced Configuration for the Connector Appliance
    Using a Load Balancer to Enable External Access to the Connector
      Apply Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to Connector
    Setting Proxy Server Settings for Connector
    Configuring Redundancy
      Configuring Failover and Redundancy for Connector Appliances
      Enabling Directory Sync on Another Connector Instance in the Event of a Failure
      Adding a Directory After Configuring Failover and Redundancy
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Reset Expired Active Directory Passwords
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrate an LDAP Directory with the Service
  Deleting a VMware Identity Manager Connector Instance
  Preparing to Install VMware Identity Manager Connector
    Planning the Deployment Strategy
    General Configuration Requirements
    System and Network Configuration Requirements
    Deployment Checklists
  Deploying VMware Identity Manager Connector
    Create Your Identity Provider
    Deploy the Connector OVA File
    Configure Connector Settings
  Managing Appliance System Configuration Settings
    Using SSL Certificates
      Apply Public Certificate Authority
    Enable the Syslog Server
    Customer Experience Improvement Program
    Log File Information
      Collect Log Information
    Manage Your Appliance Passwords
    Modifying the Connector URL
  Advanced Configuration for the Connector Appliance
    Using a Load Balancer to Enable External Access to the Connector
      Apply Connector Root Certificate to the Load Balancer
      Apply Load Balancer Root Certificate to Connector
    Setting Proxy Server Settings for Connector
    Configuring Redundancy
      Configuring Failover and Redundancy for Connector Appliances
      Enabling Directory Sync on Another Connector Instance in the Event of a Failure
      Adding a Directory After Configuring Failover and Redundancy
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Reset Expired Active Directory Passwords
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrate an LDAP Directory with the Service
  Deleting a VMware Identity Manager Connector Instance
Upgrading VMware Identity Manager Connector
  About Upgrading VMware Identity Manager Connector
  Preparing to Upgrade VMware Identity Manager Connector
    Prerequisites for Upgrade
    Check for the Availability of a VMware Identity Manager Connector Upgrade Online
    Configure Proxy Server Settings for the VMware Identity Manager Connector Appliance
  Performing an Online Upgrade of VMware Identity Manager Connector
  Performing an Offline Upgrade of VMware Identity Manager Connector
    Prepare a Local Web Server for Offline Upgrade
    Configure the Connector and Perform Offline Upgrade
  Configure Settings after Upgrading Connector
  Troubleshooting Upgrade Errors
    Checking the Upgrade Error Logs
    Rolling Back to Snapshots of Connector
    Collecting a Log File Bundle
  About Upgrading VMware Identity Manager Connector
  Preparing to Upgrade VMware Identity Manager Connector
    Prerequisites for Upgrade
    Check for the Availability of a VMware Identity Manager Connector Upgrade Online
    Configure Proxy Server Settings for the VMware Identity Manager Connector Appliance
  Performing an Online Upgrade of VMware Identity Manager Connector
  Performing an Offline Upgrade of VMware Identity Manager Connector
    Prepare a Local Web Server for Offline Upgrade
    Configure the Connector and Perform Offline Upgrade
  Configure Settings after Upgrading Connector
  Troubleshooting Upgrade Errors
    Checking the Upgrade Error Logs
    Rolling Back to Snapshots of Connector
    Collecting a Log File Bundle
VMware Identity Manager Administration Guide
  Working in VMware Identity Manager Administration Console
    Navigating in the Administration Console
    Identity and Access Management Settings Overview
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Change Active Directory Passwords
    Setting up Directory Sync Safeguards
      Configure Directory Sync Safeguards
      Ignore Safeguard Settings to Complete Syncing to the Directory
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrate an LDAP Directory with the Service
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
    Configuring Authentication Method for System Admin Users
  Just-in-Time User Provisioning
    About Just-in-Time User Provisioning
    Preparing for Just-in-Time Provisioning
      Create Local Groups
      Review User Attributes
    Configuring Just-in-Time User Provisioning
    Requirements for SAML Assertions
    Disabling Just-in-Time User Provisioning
    Deleting a Just-in-Time Directory
    Error Messages
  Configuring User Authentication in VMware Identity Manager
    Configuring Kerberos for VMware Identity Manager
      Implementing Kerberos for Desktops with Integrated Windows Authentication
        Configure Kerberos Authentication for Desktops with Integrated Windows Authentication
        Configuring your Browser for Kerberos
          Configure Internet Explorer to Access the Web Interface
          Configure Firefox to Access the Web Interface
          Configure the Chrome Browser to Access the Web Interface
    Configuring SecurID for VMware Identity Manager
      Prepare the RSA SecurID Server
      Configure RSA SecurID Authentication
    Configuring RADIUS for VMware Identity Manager
      Prepare the RADIUS Server
      Configure RADIUS Authentication in VMware Identity Manager
    Configuring RSA Adaptive Authentication in VMware Identity Manager
      Configure RSA Adaptive Authentication in Identity Manager
    Configuring a Certificate or Smart Card Adapter for Use with VMware Identity Manager
      Using User Principal Name for Certificate Authentication
      Certificate Authority Required for Authentication
      Using Certificate Revocation Checking
      Configure Certificate-based Authentication
    Configuring VMware Verify for Two-Factor Authentication
      Enable VMware Verify
      Registering End Users with VMware Verify
      Remove Registered Phone Number from User Profile
    Using Built-in Identity Providers
      Configuring Authentication Methods for Built-In Identity Providers
        Configure Password Authentication to AirWatch
        Enable Compliance Checking
        Configure the Local Directory Password Authentication Method
        Configure Certificate-based Authentication
        Configure Mobile SSO for iOS Authentication in the Built-In Identity Provider
        Configure Mobile SSO for Android Authentication
      Configure Built-in Identity Providers
      Using Outbound Connector for Authentication in Built-in Identity Providers
      Configure a Built-in Identity Provider with Authentication Methods Configured on an Outbound-Only Connector
    Configure Additional Workspace Identity Providers
    Configuring a Third-Party Identity Provider Instance to Authenticate Users
      Add and Configure an Identity Provider Instance
    Managing Authentication Methods to Apply to Users
      Add or Edit a Network Range
      Applying the Default Access Policy
        Apply Authentication Methods to Policy Rules
    Configure Certificate-based Authentication
  Managing Access Policies
    Configuring Access Policy Settings
    Managing Web and Desktop Application-Specific Policies
    Add a Web or Desktop Application-Specific Policy
    Configure Custom Access Denied Error Message
    Edit an Access Policy
    Enabling Persistent Cookie on Mobile Devices
      Enable Persistent Cookie
  Managing Users and Groups
    User and Group Types
    About User Names and Group Names
      Sync Directory to Correct Domain Information
    Managing Users
    Create Groups and Configure Group Rules
    Edit Group Rules
    Add Resources to Groups
    Create Local Users
      Add Local Users
      Disable or Enable Local Users
      Delete Local Users
    Managing Passwords
      Configure Password Policy for Local Users
  Managing the Catalog
    Managing Resources in the Catalog
      Adding Web Applications to Your Catalog
        Add Web Applications to your Catalog
      Adding Citrix Published Applications
      Adding Horizon Air Applications
    Grouping Resource into Categories
      Create a Resource Category
      Apply a Category to Resources
      Remove a Category from an Application
      Delete a Category
    Managing Catalog Settings
      Download SAML Certificates to Configure with Relying Applications
      Disable Prompt for Downloading Helper Applications
      Creating Clients to Enable Access to Remote Applications
        Create Remote Access to a Single Catalog Resource
        Create Remote Access Template
      Editing ICA Properties in Citrix Published Applications
      Enabling Application Approval for Resource Usage
        Set up Approval Workflow and Configure the Approval Engine
  Working in the Administration Console Dashboard
    Monitor Users and Resource Usage from the Dashboard
    Viewing Reports
      Generate an Audit Event Report
  Custom Branding VMware Identity Manager Services
    Customize Branding in VMware Identity Manager
    Customize Branding for the User Portal
    Customize Branding for VMware Verify Application
  Integrating AirWatch With VMware Identity Manager
    Setting up AirWatch for Integration with VMware Identity Manager
      Create REST API Keys in AirWatch
      Create Admin Account and Certificate in AirWatch
    Setting up an AirWatch Instance in VMware Identity Manager
      Add AirWatch Settings to VMware Identity Manager
    Enable Unified Catalog for AirWatch
    Implementing Authentication with AirWatch Cloud Connector
      Managing User Attributes Mapping
      Sync Users and Groups from AirWatch Directory to VMware Identity Directory
      Updating VMware Identity Manager after Upgrading AirWatch
    Implementing Mobile Single Sign-in Authentication for AirWatch-Managed iOS Devices
      Configure Active Directory Certificate Authority in AirWatch
        Configuring AirWatch to use Active Directory Certificate Authority
        Add Certificate Template in AirWatch
        Configure Apple iOS Profile in AirWatch Using Active Directory Certificate Authority and Certificate Template
      Using AirWatch Certificate Authority for Kerberos Authentication
        Enable and Export the AirWatch Certificate Authority
      Configure Apple iOS Profile in AirWatch Using AirWatch Certificate Authority
    Implementing Mobile Single Sign-On Authentication for Android Devices
      Configure Single-Sign-on for Android Device from AirWatch Admin Console
      Configure AirWatch Tunnel VPN Access Settings from AirWatch Admin Console
      Configure Per App Tunnel Profile for Android
      Enable Per-App VPN for Android Apps
      Configure Traffic Rules in AirWatch
    Enable Compliance Checking for AirWatch Managed Devices
      Configure Access Policy Rule for Compliance Checking
  Working in VMware Identity Manager Administration Console
    Navigating in the Administration Console
    Identity and Access Management Settings Overview
  Integrating with Your Enterprise Directory
    Important Concepts Related to Directory Integration
  Integrating with Active Directory
    Active Directory Environments
    About Domain Controller Selection (domain_krb.properties file)
      Overriding the Default Subnet Selection
      Editing the domain_krb.properties file
      Troubleshooting domain_krb.properties
    Managing User Attributes that Sync from Active Directory
      Select Attributes to Sync with Directory
    Permissions Required for Joining a Domain
    Configuring Active Directory Connection to the Service
    Enabling Users to Change Active Directory Passwords
    Setting up Directory Sync Safeguards
      Configure Directory Sync Safeguards
      Ignore Safeguard Settings to Complete Syncing to the Directory
  Integrating with LDAP Directories
    Limitations of LDAP Directory Integration
    Integrate an LDAP Directory with the Service
  Using Local Directories
    Creating a Local Directory
      Set User Attributes at the Global Level
      Create a Local Directory
      Associate the Local Directory With an Identity Provider
    Changing Local Directory Settings
    Deleting a Local Directory
    Configuring Authentication Method for System Admin Users
  Just-in-Time User Provisioning
    About Just-in-Time User Provisioning
    Preparing for Just-in-Time Provisioning
      Create Local Groups
      Review User Attributes
    Configuring Just-in-Time User Provisioning
    Requirements for SAML Assertions
    Disabling Just-in-Time User Provisioning
    Deleting a Just-in-Time Directory
    Error Messages
  Configuring User Authentication in VMware Identity Manager
    Configuring Kerberos for VMware Identity Manager
      Implementing Kerberos for Desktops with Integrated Windows Authentication
        Configure Kerberos Authentication for Desktops with Integrated Windows Authentication
        Configuring your Browser for Kerberos
          Configure Internet Explorer to Access the Web Interface
          Configure Firefox to Access the Web Interface
          Configure the Chrome Browser to Access the Web Interface
    Configuring SecurID for VMware Identity Manager
      Prepare the RSA SecurID Server
      Configure RSA SecurID Authentication
    Configuring RADIUS for VMware Identity Manager
      Prepare the RADIUS Server
      Configure RADIUS Authentication in VMware Identity Manager
    Configuring RSA Adaptive Authentication in VMware Identity Manager
      Configure RSA Adaptive Authentication in Identity Manager
    Configuring a Certificate or Smart Card Adapter for Use with VMware Identity Manager
      Using User Principal Name for Certificate Authentication
      Certificate Authority Required for Authentication
      Using Certificate Revocation Checking
      Configure Certificate-based Authentication
    Configuring VMware Verify for Two-Factor Authentication
      Enable VMware Verify
      Registering End Users with VMware Verify
      Remove Registered Phone Number from User Profile
    Using Built-in Identity Providers
      Configuring Authentication Methods for Built-In Identity Providers
        Configure Password Authentication to AirWatch
        Enable Compliance Checking
        Configure the Local Directory Password Authentication Method
        Configure Certificate-based Authentication
        Configure Mobile SSO for iOS Authentication in the Built-In Identity Provider
        Configure Mobile SSO for Android Authentication
      Configure Built-in Identity Providers
      Using Outbound Connector for Authentication in Built-in Identity Providers
      Configure a Built-in Identity Provider with Authentication Methods Configured on an Outbound-Only Connector
    Configure Additional Workspace Identity Providers
    Configuring a Third-Party Identity Provider Instance to Authenticate Users
      Add and Configure an Identity Provider Instance
    Managing Authentication Methods to Apply to Users
      Add or Edit a Network Range
      Applying the Default Access Policy
        Apply Authentication Methods to Policy Rules
    Configure Certificate-based Authentication
  Managing Access Policies
    Configuring Access Policy Settings
    Managing Web and Desktop Application-Specific Policies
    Add a Web or Desktop Application-Specific Policy
    Configure Custom Access Denied Error Message
    Edit an Access Policy
    Enabling Persistent Cookie on Mobile Devices
      Enable Persistent Cookie
  Managing Users and Groups
    User and Group Types
    About User Names and Group Names
      Sync Directory to Correct Domain Information
    Managing Users
    Create Groups and Configure Group Rules
    Edit Group Rules
    Add Resources to Groups
    Create Local Users
      Add Local Users
      Disable or Enable Local Users
      Delete Local Users
    Managing Passwords
      Configure Password Policy for Local Users
  Managing the Catalog
    Managing Resources in the Catalog
      Adding Web Applications to Your Catalog
        Add Web Applications to your Catalog
      Adding Citrix Published Applications
      Adding Horizon Air Applications
    Grouping Resource into Categories
      Create a Resource Category
      Apply a Category to Resources
      Remove a Category from an Application
      Delete a Category
    Managing Catalog Settings
      Download SAML Certificates to Configure with Relying Applications
      Disable Prompt for Downloading Helper Applications
      Creating Clients to Enable Access to Remote Applications
        Create Remote Access to a Single Catalog Resource
        Create Remote Access Template
      Editing ICA Properties in Citrix Published Applications
      Enabling Application Approval for Resource Usage
        Set up Approval Workflow and Configure the Approval Engine
  Working in the Administration Console Dashboard
    Monitor Users and Resource Usage from the Dashboard
    Viewing Reports
      Generate an Audit Event Report
  Custom Branding VMware Identity Manager Services
    Customize Branding in VMware Identity Manager
    Customize Branding for the User Portal
    Customize Branding for VMware Verify Application
  Integrating AirWatch With VMware Identity Manager
    Setting up AirWatch for Integration with VMware Identity Manager
      Create REST API Keys in AirWatch
      Create Admin Account and Certificate in AirWatch
    Setting up an AirWatch Instance in VMware Identity Manager
      Add AirWatch Settings to VMware Identity Manager
    Enable Unified Catalog for AirWatch
    Implementing Authentication with AirWatch Cloud Connector
      Managing User Attributes Mapping
      Sync Users and Groups from AirWatch Directory to VMware Identity Directory
      Updating VMware Identity Manager after Upgrading AirWatch
    Implementing Mobile Single Sign-in Authentication for AirWatch-Managed iOS Devices
      Configure Active Directory Certificate Authority in AirWatch
        Configuring AirWatch to use Active Directory Certificate Authority
        Add Certificate Template in AirWatch
        Configure Apple iOS Profile in AirWatch Using Active Directory Certificate Authority and Certificate Template
      Using AirWatch Certificate Authority for Kerberos Authentication
        Enable and Export the AirWatch Certificate Authority
      Configure Apple iOS Profile in AirWatch Using AirWatch Certificate Authority
    Implementing Mobile Single Sign-On Authentication for Android Devices
      Configure Single-Sign-on for Android Device from AirWatch Admin Console
      Configure AirWatch Tunnel VPN Access Settings from AirWatch Admin Console
      Configure Per App Tunnel Profile for Android
      Enable Per-App VPN for Android Apps
      Configure Traffic Rules in AirWatch
    Enable Compliance Checking for AirWatch Managed Devices
      Configure Access Policy Rule for Compliance Checking
Setting Up Resources in VMware Identity Manager
  Introduction to Setting Up Resources in VMware Identity Manager
  Providing Access to Web Applications
    Adding Web Applications to Your Organization's Catalog
      Add a Web Application to Your Catalog from the Cloud Application Catalog
      Add a Web Application to Your Catalog by Creating a New Application Record
      Add a Web Application to Your Catalog by Importing a ZIP or JAR File
    Entitling Users and Groups to Web Applications
    Using Provisioning Adapters
      Configure a Provisioning Adapter
      Enable or Disable a Provisioning Adapter
      View the Provisioning Status Report
      Example: Using the Google Apps Provisioning Adapter
        Configure a Google Service Account
        Configure the Google Apps Provisioning Adapter
        Provision Users in Google
        Provision Groups in Google
        Deprovision Groups in Google
        Enable or Disable the Google Apps Provisioning Adapter
    Additional Information
  Providing Access to View, Horizon 6, or Horizon 7 Desktop and Application Pools
    Deployment Scenario
    Integrating Independent View Pods
      Set up View
      Join Active Directory Domain
      Add View Pods to VMware Identity Manager and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Integrating View Cloud Pod Architecture (CPA) Deployments
      Requirements for Integrating View Pod Federations
      Set up Your VMware Identity Manager Environment
      Add a Cloud Pod Federation and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Enabling Multiple Client Access URLs for Custom Network Ranges
    Viewing the Connection Information for View Desktop and Application Pools
    Viewing User and Group Entitlements to View Desktop and Application Pools
    Setting the Deployment Type for View Entitlements
    Viewing Launch Options for View Desktops and Applications
    Launching a View Desktop or Application
    Allowing Users to Reset Their View Desktops in VMware Identity Manager
    Setting Access Policies for Specific Applications and Desktops
    Reducing Resource Usage and Increasing Performance of VMware Identity Manager Desktop in Non-Persistent View Desktops
  Providing Access to Horizon Air - Cloud Hosted Desktops and Apps
    Integrating Horizon Air Desktops and Apps
      Deployment Scenario for Horizon Air Integration
      Prerequisites for Integration
      Enable Horizon Air Desktops and Apps in VMware Identity Manager
      Configure SAML Authentication
        Create Federation Artifact for Horizon Air
        Configure SAML Authentication in the Horizon Air Tenant
      Syncing Horizon Air Desktops and Apps with VMware Identity Manager
    Viewing Details of Horizon Air Desktop and Application Pools
    Viewing User and Group Entitlements to Horizon Air Desktops and Apps
    Setting Access Policies for Specific Applications and Desktops
    Setting the Deployment Type for Horizon Air Entitlements
    Launching a Horizon Air Desktop or Application
  Providing Access to Citrix-Published Resources
    Integrating VMware Identity Manager with Citrix-Published Resources
    Enabling Citrix PowerShell Remoting on Citrix Server Farm
      Set up Citrix PowerShell Remoting on XenApp or XenDesktop 7.x
      Set Up Citrix PowerShell Remoting on Citrix Server Farm 6.5
      Set Up Citrix PowerShell Remoting on Citrix Server Farm 5.0 or 6.0
    Preparing and Installing Integration Broker
      Prepare Windows Server for Integration Broker (Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2)
      Deploying Integration Broker
        Install Integration Broker
        Set Up Integration Broker for HTTP and HTTPS Bindings
        Create a Self-signed Certificate Example
    Synchronizing VMware Identity Manager with Citrix Server Farms
    Configuring VMware Identity Manager for Netscaler
      Configuring Netscaler
      Configuring Access Policies for Citrix Resources
      Editing ICA Properties for Netscaler
    Viewing User and Group Entitlements to Citrix-Published Resources
    Setting the Deployment Type for Citrix Entitlements
    Editing Delivery Settings for Citrix-Published Resources
      Edit Resource Delivery Settings Globally for All Citrix-Published Resources
      Edit the Delivery Settings for a Single Citrix-Published Resource
    Managing Categories for Citrix-Published Resources
    Setting Access Policies for Specific Applications and Desktops
    Launching Citrix-Published Resources in Different Browsers
  Troubleshooting VMware Identity Manager Resource Configuration
    Users Accessing Citrix-Published Resources Receive an Encryption Error
    Citrix-Published Resources Are Not Available in VMware Identity Manager
    When Users Launch a Citrix-Published Resource, the Browser Displays 500 Internal Server Error
    Memory Issue Prevents Proper Configuration of Integration Broker
    Resource Not Available Error while Launching XenApp 7.x Desktops
    Unable to Launch Desktop from Citrix XenDesktop Farm on Windows 7
    Users Unable to Launch View Applications or Desktops
    Unable to Synchronize View Resources
  Introduction to Setting Up Resources in VMware Identity Manager
  Providing Access to Web Applications
    Adding Web Applications to Your Organization's Catalog
      Add a Web Application to Your Catalog from the Cloud Application Catalog
      Add a Web Application to Your Catalog by Creating a New Application Record
      Add a Web Application to Your Catalog by Importing a ZIP or JAR File
    Entitling Users and Groups to Web Applications
    Using Provisioning Adapters
      Configure a Provisioning Adapter
      Enable or Disable a Provisioning Adapter
      View the Provisioning Status Report
      Example: Using the Google Apps Provisioning Adapter
        Configure a Google Service Account
        Configure the Google Apps Provisioning Adapter
        Provision Users in Google
        Provision Groups in Google
        Deprovision Groups in Google
        Enable or Disable the Google Apps Provisioning Adapter
    Additional Information
  Providing Access to View, Horizon 6, or Horizon 7 Desktop and Application Pools
    Deployment Scenario
    Integrating Independent View Pods
      Set up View
      Join Active Directory Domain
      Add View Pods to VMware Identity Manager and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Integrating View Cloud Pod Architecture (CPA) Deployments
      Requirements for Integrating View Pod Federations
      Set up Your VMware Identity Manager Environment
      Add a Cloud Pod Federation and Sync Resources
      Configure SAML Authentication
        Establish or Update SSL Trust between VMware Identity Manager and the View Connection Server
    Enabling Multiple Client Access URLs for Custom Network Ranges
    Viewing the Connection Information for View Desktop and Application Pools
    Viewing User and Group Entitlements to View Desktop and Application Pools
    Setting the Deployment Type for View Entitlements
    Viewing Launch Options for View Desktops and Applications
    Launching a View Desktop or Application
    Allowing Users to Reset Their View Desktops in VMware Identity Manager
    Setting Access Policies for Specific Applications and Desktops
    Reducing Resource Usage and Increasing Performance of VMware Identity Manager Desktop in Non-Persistent View Desktops
  Providing Access to Horizon Air - Cloud Hosted Desktops and Apps
    Integrating Horizon Air Desktops and Apps
      Deployment Scenario for Horizon Air Integration
      Prerequisites for Integration
      Enable Horizon Air Desktops and Apps in VMware Identity Manager
      Configure SAML Authentication
        Create Federation Artifact for Horizon Air
        Configure SAML Authentication in the Horizon Air Tenant
      Syncing Horizon Air Desktops and Apps with VMware Identity Manager
    Viewing Details of Horizon Air Desktop and Application Pools
    Viewing User and Group Entitlements to Horizon Air Desktops and Apps
    Setting Access Policies for Specific Applications and Desktops
    Setting the Deployment Type for Horizon Air Entitlements
    Launching a Horizon Air Desktop or Application
  Providing Access to Citrix-Published Resources
    Integrating VMware Identity Manager with Citrix-Published Resources
    Enabling Citrix PowerShell Remoting on Citrix Server Farm
      Set up Citrix PowerShell Remoting on XenApp or XenDesktop 7.x
      Set Up Citrix PowerShell Remoting on Citrix Server Farm 6.5
      Set Up Citrix PowerShell Remoting on Citrix Server Farm 5.0 or 6.0
    Preparing and Installing Integration Broker
      Prepare Windows Server for Integration Broker (Windows Server 2008 R2, Windows Server 2012, or Windows Server 2012 R2)
      Deploying Integration Broker
        Install Integration Broker
        Set Up Integration Broker for HTTP and HTTPS Bindings
        Create a Self-signed Certificate Example
    Synchronizing VMware Identity Manager with Citrix Server Farms
    Configuring VMware Identity Manager for Netscaler
      Configuring Netscaler
      Configuring Access Policies for Citrix Resources
      Editing ICA Properties for Netscaler
    Viewing User and Group Entitlements to Citrix-Published Resources
    Setting the Deployment Type for Citrix Entitlements
    Editing Delivery Settings for Citrix-Published Resources
      Edit Resource Delivery Settings Globally for All Citrix-Published Resources
      Edit the Delivery Settings for a Single Citrix-Published Resource
    Managing Categories for Citrix-Published Resources
    Setting Access Policies for Specific Applications and Desktops
    Launching Citrix-Published Resources in Different Browsers
  Troubleshooting VMware Identity Manager Resource Configuration
    Users Accessing Citrix-Published Resources Receive an Encryption Error
    Citrix-Published Resources Are Not Available in VMware Identity Manager
    When Users Launch a Citrix-Published Resource, the Browser Displays 500 Internal Server Error
    Memory Issue Prevents Proper Configuration of Integration Broker
    Resource Not Available Error while Launching XenApp 7.x Desktops
    Unable to Launch Desktop from Citrix XenDesktop Farm on Windows 7
    Users Unable to Launch View Applications or Desktops
    Unable to Synchronize View Resources
PDF Product Documentation
  PDF Product Documentation
  PDF Product Documentation
Setting up VMware Workspace ONE Application on Devices
  Catalog Integration with AirWatch from VMware Identity Manager
    Setting up AirWatch for Integration with VMware Identity Manager
      Create REST API Keys in AirWatch
      Create Admin Account and Certificate in AirWatch
      Create REST Enrolled User API Key
    Add AirWatch Settings to VMware Identity Manager
    Enable Unified Catalog for AirWatch
  Deploying the VMware Workspace ONE Mobile Application
    Supported Platforms
    Managing Access to Applications
    Getting and Distributing the Workspace ONE Application
      AirWatch App Configuration for Enterprise Key Value Pairs
    Registering Email Domains for Auto Discovery
      Set up Auto Discovery in VMware Identity Manager
    Session Authentication Setting
      Enable Compliance Checking for AirWatch Managed Devices
    Customize Branding for the User Portal
    Using the Workspace ONE Mobile Application
    Setting Passcodes for the Workspace ONE Application
  Working in the Workspace ONE Mobile Application
    Working with Web Apps in Workspace ONE
    Adding Native Applications
  Catalog Integration with AirWatch from VMware Identity Manager
    Setting up AirWatch for Integration with VMware Identity Manager
      Create REST API Keys in AirWatch
      Create Admin Account and Certificate in AirWatch
      Create REST Enrolled User API Key
    Add AirWatch Settings to VMware Identity Manager
    Enable Unified Catalog for AirWatch
  Deploying the VMware Workspace ONE Mobile Application
    Supported Platforms
    Managing Access to Applications
    Getting and Distributing the Workspace ONE Application
      AirWatch App Configuration for Enterprise Key Value Pairs
    Registering Email Domains for Auto Discovery
      Set up Auto Discovery in VMware Identity Manager
    Session Authentication Setting
      Enable Compliance Checking for AirWatch Managed Devices
    Customize Branding for the User Portal
    Using the Workspace ONE Mobile Application
    Setting Passcodes for the Workspace ONE Application
  Working in the Workspace ONE Mobile Application
    Working with Web Apps in Workspace ONE
    Adding Native Applications