A destination NAT rule translates the IP address and port of packets received by an organization vDC network coming from another organization vDC network or an external network.

1

Click the Manage & Monitor tab and click Organization vDCs in the left pane.

2

Double-click the organization vDC name to open the organization vDC.

3

Click the Edge Gateways tab, right-click the edge gateway name and select Edge Gateway Services.

4

Click the NAT tab and click Add DNAT.

5

Select an external network or another organization vDC network to apply this rule on from the Apply to drop-down menu.

6

Type the original IP address or range of IP addresses to apply this rule on in the Original (External) IP/range text box.

7

Choose the Protocol to apply this rule on from the drop-down menu.

To apply this rule on all protocols, select Any.

8

(Optional) Select an Original port to apply this rule to.

9

(Optional) Select an IMCP type to apply this rule to if this rule applies to IMCP.

10

Type the IP address or range of IP addresses for the destination addresses on inbound packets to be translated to in the Translated (Internal) IP/range text box.

11

(Optional) Select a port for inbound packets to be translated to from the Translated port drop-down menu.

12

Select Enabled, and click OK.

The destination IP address and port are translated according to the destination NAT rule's specifications.