After you run the Horizon Workspace Setup wizard, you can configure the SecurID page.

Verify that RSA Authentication Manager (the RSA SecurID server) is installed and properly configured.

Download the compressed file from the RSA SecurID server and extract the server configuration file. See Prepare the RSA SecurID Server for the Connector.

1

Click Advanced > SecurID to open the SecurID page.

2

Click the Enable SecurID check box.

3

Configure the SecurID page.

Information used and files generated on the RSA SecurID server are required when you configure the SecurID page. See Prepare the RSA SecurID Server for the Connector.

SecurID Configuration Settings

Option

Action

Connector Address

Enter the appropriate Connector IP address. The value you enter matches the value you used to configure the RSA SecurID Server when you added the Connector as an authentication agent. If your RSA SecurID server has a value assigned to the Alternate IP address prompt, enter that value as the Connector IP address. If no alternate IP address is assigned, enter the value assigned to the IP address prompt instead.

Agent IP Address

Enter the value assigned to the IP address prompt in the RSA SecurID server.

Server Configuration

Upload the server configuration file. First, you must download the compressed file from the RSA Secure ID server and extract the server configuration file, which by default is named sdconf.rec.

Node Secret

Leaving the node secret blank allows the node secret to autogenerate. It is recommended that you clear the node secret file on the RSA SecurID server and intentionally do not upload the node secret file to the Connector. Ensure that the node secret file on the RSA SecurID server and on the Connector always match. If you change the node secret at one location, change it respectively at the other location. For example, if you clear or generate the node secret on the RSA SecurID server, clear or upload the node secret file on the Connector as well.

4

Save your SecurID settings.

The connector-va virtual machine is configured to use RSA SecurID to authenticate users with Horizon Workspace.